the wiring on my car is poo all brittle and all coilpack connecvtors are shot also injector connectors aswell does anybody know where i can get new ones to solder into loom

cheers

Rob:headvswal

Check the traders section on here, DTA or MJP should be able to get them.

Or try zcentre, see this link.

http://www.zcentre.co.uk/shop/index.php?cPath=21_52_47

cheers stu the design is rubbish so many connectors that are all crap..

somebody needs to desxign a new whole rig for this car to sort this problem out once and for all im going to work on a solution ...

i think a bunch of ht leads to a coil manifold with 6 coils on it with hardwired connections as it would not need to move also it would be nice and cool away from the block..

 

ill see what i get time to do just the price of 6 connectors and 2 coil packs is alot at 150 quid then probably a ptu aswell at another 150 ..

if i can design a good alternative solution maybe for half that price.

now the task is finding a space for a few coils to sit maybe 3 each side somwhere .

what do you think stu could it work ??

the prob is that over time they all become very brittle, another way to go is to buy a complete new loom, that has every connection new aswell.

Try SWZ in traders too, one thing to bear in mind, is that there isnt much room for anything around the plenium.

One bit of advice is pay £20 and become a subscribed member as it opens up a load of other thenical stuff, most folks have had problems on here and it has a vast knowledge base.

Stu

stu ive been looking all over this site and i can t find where to subscribe ..

how frustrating......

a suggection to forum owners is to put a nice sticky on main page with the link to membership and benefits would make sence and alot of money too...

im a car trader also who has fell in love with this car so i think i will be spending alot of time on here anyway..just mooching...

have had the chance of alot of these cars but the one i just got in is lovly red with 18"alloys grey leather etc etc

im just going to get it running right first... then do the simple mods filter boost nozzles chip and plugs and pipes...

i have a real interest in making some good mods for this car i think...

i might hard wire the loom to the coilpack using spade connectors then fill with silicone and let it dry then fit a plug on to loom and one on the wire coming from colipack..

this will sort the problem for sure and if i lightly pray with wd before putting silicone in it will create a nice silicone watertight plug ..lol i hope if it does im going into production big time a nice fitting rubber bung plug is the way forward ..maybe i dont know yet after this weekend we will see what my mad ideas have come up with ....

Try the Club Membership and Inquiries section on the main page, forth one down.

 

Paul

Edited December 13, 200817 yr by 300_zedx

cheers paul found it .. if they put a small banner up top with subscribe here for all extra goodies i htink it would help ....

Glad to help,

cheapest method for new coil pack connectors is go t scrapyard and find some nissans in there and rob all the connectos of the engine bay harnesses , they are used on several nissans ,the grey connector strips apart so you can use the shell as long as its the same amount of pins

rich

hey mate have a look at drift works they do a remote coil pack kit. Might give you a head start on your mod. Coils will be god post tomorrow

cheers rich i was thinking that as i was looking on the .nz ebay site and a knock sensor was 30 quid and on .c o.uk was 129 quid else where but was advertised for some other common 3.0 v6 nissan so i guess its a case of chop and change .. my harness just seems so brittle im concerned that all the swapping out of components will get me nowhere and ill have to change harness .. and knowing my luck it will probably be a vacuum pipe or something

cheers ron thats all im waiting on sent postal order today im all put back together now just waiting on 1 coil pack as 1 of mine is definatly goosed as i put poo connectoron backwards lol and it melted ...

Hey mate

 

Im sorry for the delay Ive been manic will be in the post in the morning. Ill try and get them sent 24hrs for you

 

Sorry for the delay mate.

 

Ron

hi bud. I have a set of 3 brand new injector connectors if they any good to you email me on addy below. Cheers jay