General Discussions - Non 300ZX

Here are the times so far, in Excel format. TSC IV Times Note to moderators ... allow 'XLS' files to be uploaded. Not official but ... Eddie to burger van ... 15.45 seconds, I had to swerve round a Scooby.

Are you dodgy? http://www.thesite.org/magazine/dodgy.html Mine was 72.5 years in prision and £7000 potential fine, naughty boy, lol! Rich:D

AKA scamera vans. Wondered what opinions you have of them? They dont get targeted by anti camera groups like the fixed gatso's do. I think we're gonna be seeing more and more of them , especially on dual carriageways where they rake in a mint from a high turnover of traffic. IMO the vans are the lowest of the low, you never know where they're going to be 'keeping an eye on your safety' what a joke, only it aint funny. What is their so called purpose? To promote road safety and prevent accidents? So what do they do - they prosecute on a mass scale average drivers traveling slightly over the speed limit but in the majority 100% safely, and worse they totaly i…

Is there any graphic designers etc out there that can do me a disc or two with some really good quality pictures, doesnt matter what software its on or if its mac, i just need to print some really nice samples on our new colour printer for some customers. Thanks Mike

On me way up to top speed challenge 2day, travelling in a convoy of three I was following at the back got a pull off undercover police in a bmw :( got read me rights before me foot was out the car! was'nt nailing it just a steady pace it was 7am on a single carrage way, he said i was doin 82mph in a 60mph, dunno where he come from tho :shock: not looking forward to me insurance renewal :cry: Good day tho they could not run the top speed part because it was to windy!

The car actually stops now :D :D :D They are fantastic!!!!

Here

But not for speeding...... I picked up my Zed on the back of a trailer at the weekend, Driving down the M6, and the trailer had the detachable steel ramps, one of the securing bolts must have loosened due to vibration and a ramp fell off (flat & about 2-3ft long with rolled edges) Being conscientious & concerned for others peoples safety, I immediatley pull off at the next off ramp and give the police a call. They tell me to wait and a car will try and recover it. I wait for an hour or so with 3 severly bored & tired kids at 10pm. Police turn up and inform me that it's not their job to recover the ramp, it'll be done by the motoway ppl & I …

hey, just wanted to say that i have just recieved the sub and speakers my mate picked up from you. I am very impressed and wanted to say thank you foo being patient. Anyway, if you come across another sub like the one you sold me i would be very interesed.....and i am sure we could negotiate a price.......lol!! cheers mate. Rav :dance:

I just had 1 flash me to move out the way :nono: he had the roof down at 10.30pm, I had a jumper and jacket on! I lead him into a faulse sence of security around town, then came the traffic light moment and my tt come out to play :xxx:

Anyone know if I can claim for a roof tile that came off my house roof yesterday and landing on my bonnet causing a fair bit of damage, would it be on the contents insurance , building insurance or car insurance ( hope not) or is it one of those "Act of God" things? Jeff

Right, well I got the chance this morning to put the remaining panels back in the car, before the wind got up. Well I'm not entiely happy with it, but they say that you are your own worse critic.......... errrrmmmmmmmm we'll see. Have sent Luke an e-mail to quote me for a FULL leather re-trim, but I'm deffo having the seats done anyway. Comments please, constructive ones would be nice but I know that I'll get some non-constructive ones as well :slap: So I know the following...... The grass wants cutting, my patio chairs have fallen over, the carpets want cleaning and I've got a pack of POLO in the dash :D They are a little big, hence as attachments o…

Look what the postman FINALLY delivered this morning. Been waiting three months for these babies.

Having had a real blast on a track I'm of a mind to get the engine rebuilt to make sure that I don't get any nasty surprises. So........ Standard spec rebuild ? How much ? Who could do this ? Up-grade spec ? Same questions....... Is it worth replacing the turbos if I do this ? They are getting on a bit I suppose :D I'm planning to up-grade the suspension and brakes anyway. What else ? Clutch ? I know a lot of this is 'how long is a piece of string stuff' so I should mention that I haven't won the lottery or anything. As always, all comments are gratefully received. Mark

I'm sure this must of been posted before. http://www.wraggy.com/barryboys/html/barry2.htm Funny as fook :rofl: :rofl: Rich:D

Z goes in for the dent/respray back quarter tomorrow- I hope it turns out OK. I looked round and thought XL in coventry SEEMED very professional. PLEASE someone tell me they are good. It has to have the dent reshaped and the quarter panel sprayed, and the bumper repainted. Will it look OK when it comes back to me? The guy assured me it will look as good as when it was undamaged. What do they actually do to strip the old paint back? or do they just spray after priming it or something? On the estimate it said 'prepare and paint'. Do I have to be careful with the paintwork for a while after (like no pressure washer, or even washing it)?

Anyone else know this car on the left??

Well chaps it's been a year to the day since i had my bike accident, 12 Ops and a shed load of pain later, i'm still wearing an external fixator on my left thigh and my Z is getting very lonely in the garage. I think MAC should give me some of his anti-depressants....LOL :rofl: Rich :cry:

Thank you! :dance: http://sylfest.hiof.no/~morteali/down.htm

Finally, got my car sorted. 3 Months off breaking down with an intermittant fault. The fuel temp sensor was a red herring causing thrown in. This was bypassed, and in the end it turned out to be the AFM. As it was slowly breaking down and not faulty it would still rev above 2500rpm. I replaced afm with one I got from Jeff and car now runs beautifully. Many thanks to all those who helped. 3 names really stick out - AndyDuff, John Dixon and Lymon Thanks again :p :bow:

My weekend has been rather a bit hectic and tiring. Had to get the Zed ready for transporting all the way to Preston to Duffer's place. Got up on Saturday morning and headed towards East London and started adjusting the suspension which took me loads of time whilst at the same time removing my rear spacers. The suspension was really hard as you dont have much space to turn the c spanner as its a bit akward, my arm was killing me by the end of it!!! After getting that done i tried F U C King up the PTU but couldint get the damn Boost pipe off (my inexperience shows here) a quick call to Stuart (SMW1) who may i say was a great help, and i asked him if he coul…

I thought I'd post up some pictures as I know how you guys like pictures :dance: I removed the dial cluster from the car Fitted Chrome Dial rings (available from Danny - DTA Motorsport) I then fitted the Dials which were supplied by Vijay Fitted it all back into the car and tested out the colour changes and dimmer. The only problem I had was getting the the needle of the two large dials though the small circle of the new dial face. Also, yes, I did adjust my fuel needle, because it has always been reading a quarter of a tank low since I fitted my ali dial suround about 5 months ago. Time taken: Remove dial cl…

if anyone has a d.w.a my female looks pregnant might just be a phantom but if she does drop neonates free to a good home , must have a d.w.a if need be will sex them do have albino strain in them.

http://www.yetisports.net/yetisports3/ My best is 390...

Am I sick & wrong and in need of help when I say I have dreams of Vicky Butler-Henderson thrashing the nuts of of my Zed??!!! :dance: