For Sale - Parts

job lot of z bitS PICK UP ONLY AND MUST BE SOON AS POSSIBLE. SEE PIC NEEDS TO GO IN ONE GO NOT GO TIME TO POST EGR BLANK PLUG TARGA ROOF END CAPS X2 FRONT TRAYS MANUAL GEAR BOX SPACER PLATE LOTS OR OEM CLIPS FRONT OIL COOLER BAR FRONT STRUT TOPS CLUTCH LINE UP TOOL UNDER SIDE HEAT TRAY MANUAL GEAR LEVER RUBBERS AND HOLDERS PTU BALLAST X2 POWDER COATED CHASSIS BAR REAR SUMP SEAL GEAR BOX SEAL WHITE CLUSTER LED SET AND A FEW OTHER BITS X3 CAM COVERS PLENUM COVER CUT OUT FOR STRUT BRACE

The Standard exhaust on my Zed is a little tired, it's blowing from the downpipe somewhere and the rest of the system is looking kinda ropey, so i'm after something new, anyone got a full system including downpipes that would fit my N/A?

I bought this bottom end with the intention of a winter project. Unfortunately all Z work has ceased for the foreseeable future due to financial issues taking priority. So I need to raise some funds and will be selling a few parts I have purchased for my Z.... I was informed a bearing had spun when I purchased it...... so it will need rebuilding and machining...... so is perfect for rebuilding either a NA engine or using a TT sump and pistons to convert to a TT bottom end.

This early series steering wheel must be as good as it gets 2nd hand, front and back. I removed this myself from a breaker about a month ago, left it untidy until i paid for it (insert sneaky smiley here) but i did realize it could well be nice and so it was to be after i cleaned it up. No wear marks at all which is incredibly strange, just the odd mark and i mean that, there are two that are on the right hand side and barely visible, i'm being very honest here, i wouldn't ask for the price if i didn't think it worth it. You want oe then here it is, all totally factory. No cruise buttons or airbag - just the horn push pad with the original Z badge, both totally…

Due to having a leak my battery tray has rotten away. I now need a new tray and support bracket from a donnor Zed. Anybody got a breaker with a good tray they can cut out?

Hi guys, I'm in need of a single injector please. If anyone has an injector for sale please pm me, just wanna get my girl running right again...

Hiya guys, clumsy here cracked his fan shroud... anyone got one kicking about? Thanks

Does anyone has a lower front arm. mine needs replacing. it looks like this: http://www.ebay.co.uk/itm/90-96-Nissan-300zx-Front-Driver-Left-Lower-Control-Arm-FLCA-Stock-OEM-/162370764487?hash=item25ce0d3ec7:g:3osAAOSwo4pYijQY

Anyone in London or around London got a pair of engine mounts for sale ? I need a pair asap. Thanks.

Hi Guys, I have to two standard turbos for sale , removed from a H plate import manual. They worked fine before the engine was removed, boosted well and no smoke. In my opinion both could do with a re-build (shaft play) no marks on the housing and the blades look fine . (quite suprised they had shaft play to be honest) Could put up a short video if enough interest. I would like £80 each for them . They weigh a fair bit so could get shipped by a courier of your choice or collection from Cardiff. Thanks, Adam

He guys still after one of these elusive little buggers. Anyone got one please let me know, the series 2 pod is sitting on my shelf taunting me :cry:

Hi guys does anybody have a boot lock lying about that doesn't have a set of keys as a partner.. Gonna be putting the rear tails and center panel back in and need a lock to plug the hole..

Hiya guys think my maf has gone and not liking the selection on eBay right now. Anyone got a good one they're willing to part with? Thank

Bit of a long shot But does anyone have any rear shock dust boots?

As title ,tailgate needed for a lwb, if is re even better .

Wanted single prop for auto

As Above , Series 1 PTU, good working order. Image Below £30

Looking for a rear bumper with the smaller license plate opening. (Japan-USA?) Its for a LWB.

*** SOLD *** Pair of MSP manifolds. Please note that some material has been ground away on one of the manifolds (arrowed). The wall thickness is 3mm at the thinnest point. Also arrowed is where one of the heat shield lugs has been ground away. Otherwise they are in good condition. I don't have the fitting kit items. £250 including P&P to UK addresses. Priced to sell - no offers please.

looking to swap out my TSW wheels, not my style. Any offers of 18", possible 17s would be great. Will need good tyres on them too as the rears on mine cost £350 and have only done 700 easy miles. Check my pics for images as photobucket is not working at the mo. Will post when It works. Or check the link below, half way down. http://www.300zx.co.uk/forums/showthread.php?186101-Autumn-2016-zx-photo-competition-entries/page2 Cheers, Steve

Air conditioning cooler ( radiator)

Looking for a clean and tidy 3rd brake light with harness and any fitting hardware. I had wanted to buy a new one but unfortunately they are now discontinued.

I need a swb na manual prop. Or a LWB na prop, manual or auto.

Hi peeps. Just got a shorty but it only has 1 key with it, and it only fits the ignition. Remote locking only! So has anyone got a lock set with keys going? Don't need ignition barrel, just doors and boot!

Im restoring my rear subframe at the moment and The Hicas pipework and rear solenoid under the passenger side By the rear arch look quite bad I know many of you have deleted the hicas Does anyone have th rear solenoid and the pipes to the hicas rack please