yewcheck

Thought i was cheers Joel..right were is my spanners:)

Just before i get dirty, i am 90% sure on this but thought i would ask any way i am just about to fit my new upper arms.....and they are handed. Just to be sure when the part is labeled lh or rh does this mean lh= n/s or passenger side and rh= o/side or drivers side Pretty certain lh= n/s but thought i would check Dave

Proper Number Plate:tongue:

Thanks Jeff, i thought that if i leave the rubber on and do nothing with the sheared bolt i might experience some noise due to it flapping about!

I just replaced front and rear shocks,and thought i would replace the silicone filled bushes in the tension rods. The 12mm Bolt holding the rubber strip to the bottom wishbone sheared off:headvswal on both sides :headvswal:headvswal. My question is the rubber strip is it to aid airflow to the brakes? and what effect would it have if i removed them. Otherwise it means drilling out the part thats left sheared in the wishbone:rolleyes: Dave

Thanks Isaac,for the help i will hopefully get them fitted and the car on the road this weekend,and will post up the differences for future posts. And will have to diet soon because i have to drive the Mg to exeter:shock:and really not looking forward to the pain:D Thanks again Dave

I set mine at 4 on the back and am going to fit the fronts tomorrow so will try that setting And also try a sports bra!! it does wonders :rofl: trust me my wife has a mg tf and after i driven that for 10 mins nearly cause myself an injury:eek: cheers for that Oh by the way on those settings how does it compare with stock? I found the stock shocks just right

Just fitted new kyb adjustable rear shocks wondering whats a suitable setting for the ride comfort I do not want to hard because it hurts my man boobs:tongue:

Ditto

She might be coming to Japfest with me in May, so no silly comments to her! LOL No Brainer............. ask her as you are drifting around Quarry:x:

Well all done ...elecs was not much of a problem after all! just unplugged from loom

So it seems ok to just leave them and make sure cabled tied and wrapped to stop any rattling. cheers guys all ready to remove/replace tomorrow

:rolleyes:i know that lol just that alan said he cut his,and i cannot see why i cant just leave them disconnected oh and cable tied back:p

What about just leaving it off just hanging?

Replacing my rear suspension tomorrow and today have stripped out all the rear interior panels. When i fit the new suspension units [non oe] do i just leave the motors hanging disconnected?? Dave

Looks very much like it, i had a 260z painted in candy apple vermillion and looked just like that

Should have left it yella:D

That looks perfect Isaac what else can i say, many many thanks Dave Right off to do some post whoring;)

Could you centre it up:o

:bow:Isaac you are the man;)

Just been looking at them again and you know i think you are right lets go for the 1st one;):D And once again many many thanks Dave

Nooooooooooooooo don't say that!!!! i am not sure which one to use now:confused: What do you reckon? Dave

It was in correct,give me a few moments to get it over to you:rolleyes:

Hang will check:slap:

Just sent and yes it is the original [hope its the correct one!] regards Dave