DGM

Sounds like an invertor, does your rear panel light up when lights are on, are there any wires going to it, if it is an inverter then it is a small metal box fixed to the inside of the back panel, take the centre trim of and have a look.

I went through this recently, swapped coil packs over e.t.c. turned out it was the injector connector, as Legrath suggested, though it didnt come back to life with just a wiggle, it took a bit of cleaning to.

Hopefuly that will be it.

Anywhere between £140-£160 depending on No of grooves etc

Did yopu reolve this? I have a similar problem at the moment. cheers

If that is the end of the chassis it should be well strong enough, IMHO.

Look very similar to the Megan ones you sometimes get on ebay, design looks good but dont know anything about the manufacturer.

Short write up here http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=960871

Got EBC myself, no problems.

MMMMMMMMmmmmmmmmmm!

Tps hasn't moved, connectors are reasonably clean and i'm searching for the adjustment/setting step by step. The rpm is stable ish, but sometimes it cant hold itself there and cuts out. Anymore thoughts appreciated.

No ideas anyone?

Idle dropped of yesterday for no reason that i am aware of, it now sits at 500 to 650 ish. When started this morning there was no choke function, ie the revs went straight to 500, as the engine gets warmer the revs rise at idle to 650, no error codes, any help much appreciated as always, David

Dont see many around this neck of the woods.

Nice bit of reading there.

Nice one mate :hyper: :hyper:

http://www.ttzd.com/tech/pcvtech.html and another

http://www.courtesyparts.com/z32/oe_pcv.html

Anyone still interested in this?

Just do it

Yup no guage and the engine shot is really tight so you cant see additional pipes, pretty suspect.

I got the blue flame exhaust the other day, it looks like good quality, had to persuade a couple of the hanger arms for a good fit but apart from that its spot on. A couple of months ago i purchased the decats from ebay, difficult to fit but good quality and good price.

Thats it fixed now, cheers.

I think the bell housing needs modified, do a search, ithink this has been covered before.

Bump