mantav8

Yeah!-was going to do the same,but the warning light is a good idea I reckon! Box should be to the right of the ECU.reading more of the above,some say to leave the box in and unplug a small connector,looks like I'll be unplugging first!:ph34r:

That's the idea,plus the hicas pipes on mine were leaking so 2 birds and all that!:wink:

AH!-found it,looks easy then!:sorcerer: http://www.twinturbo.net/nissan/300zx/forums/general/view/2199825/Link-inside.html

Loses the 'vague' rear end!:chef:

After eliminating the Hicas,is it possible?-would be good as a low fluid warning?:detective:

Not so shiny in this shitty weather!!:ph34r:

Well the good news is it fits!-this is the kit, I was worried the arms looked weedy in the ad but they are 14mm so happy with that! Just a quick measure to set up the arms when fitted, Then took off the old rack,valve,Solenoid etc. The bar fitted,this needed one hole elongated about a mm to fit but that's the only issue I had. Next job was to remove the outer ball joints,this is how I do them,takes 10 mins each. The 'Top-hat' alloy inserts then fitted along with the arms, Adjusted to the measurements taken and I have a tight arse!:ohmy: So all in all I'm happy with the Quality,fit etc.Time will tell if it's up to the job! Thought I would Waxoyl the sills whilst on the ramp,drilled a couple of holes into the sill,pushed a 5' long pipe down and filled em' LOL!-a couple of grommets to bung the holes and undersealed over! Got home and fitted new injector plugs,what a PITA job!-these are the plugs I used,need a bit of modding but at £3 each was a cheap alternative! and they won't fall off! Tomorrow I fit the new PTU and hope that's the misfire sorted!:sweatdrop:

Woohoo!-I'll be fitting the ''Bycas'' Tomorrow,will put up the results!:biggrin:

Have a Barby on me mate!:tt2:

As said mate,tell em' to shove it and go elswhere!-plenty of people want your business.:thumbup1:

I'll let you know,just got the same kit-only looked in the box but the wiring/connectors look the job!:detective: and the ballasts are ultra thin which is good for mounting.

Temp,yes.-fitting the new injector plugs and PTU at the W/end.:balloon:

Daffy-received this Today and well impressed with it!-chunky rose joints the bar is well meaty too!-Fitting it Saturday at work so will update on any fitment issues!:chinese:

DON'T be tempted to grease/oil the new one tho'!!:ninja:

As said-that is worst I have seen!-not helped by the crappy repairs done before! Prices as they are mate,buy another for what you will make in bits off your old one!:yes:

Shitstirrer!:ninja:

Pretty certain :wacko:

PMSL!!:lol::lol:

Cheers Daz, as you can guess nowt to do with the PTU and what I did Saturday!-but will still fit it and new injector plugs and it's a bit more of the 20 year crap gone!!:laugh:

The old tests are the best mate!:ninja:

Yup!-now he'll be out nicking someone else's Flatscreen,PS3,etc.............:no:

Got home and got straight into the Z,cracks up fine,then steadies as she warms up and then WALLOP! the misfire starts:pinch: I intended just cutting off the PTU plugs etc ready for Daz' series 2,then I here it, tick,tick,tick..... So off went the lights got my eyes used to the dark and enjoyed the fireworks! No'3 coil is fubar,sparking out the side,so off to the local Z spares (cheers AL) And back with a couple of Coilpacks.Sorted,so I thought.Better but not there,wiggled the siliconed on injector plugs (yes you read right) and it's all over the shop!:thumbdown: pulled off three plugs and they are Green/fooked! Started up again and loads better!-but not right............... Lights out again, WHAT?-no'1 coil is fecked too!-changed that and BINGO!:chinese:-was that chuffed I fitted my Apexi,went up the road and nearly lost it!:yes: New injector plugs from work Tomorrow methinks!

OH Yeah!-I need you!:tt2::wink:

In case Daffy is interested,I have gone for the above from Conceptua-will let everyone know the results!:sweatdrop:

Traders policy mate,this is my next route at renewal time! As said,try Heritage,quoted me £296 doing 5000 miles a year,4 years NCB -oh! and I'm an old fart!:chinese: