mrogers

least it wont leak or jam open

do they have the short wheel nuts

According to What car, the mondeo is a better drivers car but the vectra is the better moterway cruiser.

can the threads be retapped on the ones i have?

wont the micra ones be the same? the std ones are 35mm long but i need 20mm long ones. the spacer has a coned dish.

Finally got a set of spacers/hub adaptors from my 300zx, but idiots supplied 20 nuts with the wrong tread. As you can see in the pic I have the new nut on left, std 300zx one in middle and tuner 300zx one on the right. Anybody know where i can get M12 300zx nut but as stumpy as the one in the pic (on left)

hope you have a big driveway lol

how do you find bourne ultimatum on stage 6?

slicktops or for queers especially blue ones. look like a 300zx cut and shut gone wrong. :dance:

Look to shave some weight off the car, cheaper and will give good returns.

Just think it costs about £900 for the first 60-80 bhp and then £4,000 for the next 40.

mods should get you over 400 but remember the intercooler too.

360bhp

Deffo not Funky Si then.

it wont start gathering from his prev posts

or when you go lowering crazy like you did on your silver one.

you sick mofo's lol

If i dont blow the car to kingdom come mate lol

White = 27 Mass Air Flow Sensor MAF Brown = 42 Camshaft Position Signal (Down as Crank 1 sensor in manual) Pink = 1 Ignition 1 Coil #1 (No 1 Ignition Signal in manual) Blue = 41 Camshaft Position Reference Signal (Crank 120/180 signal in manual Orange = 101 Injector 1 Black = 26 Mass Air Flow Sensor Ground (Ground in manual) Red = 59 Power for ECM (IG Power in manual) Green = 53 Vehicle Speed Grey = Only used if removing speed limiter Light Blue = Not Used Ediited to correct

Anybody got a pic of how to wire this into the ECU on a z32? My instructions are in japanese :(

Suzy and russ from z club are both SW

need a bloody big tow truck to get them all to exeter though

Will be if i got a zed.