vijay

A massive thank you to Jaz, Nigel and Trev for getting these faces to look as good as they do!!! I need peoples opinions on what we would like now. I know we are going to have different speedo's depending on Jap or UK but I'm looking to get a UK (mine:D ) done first to check it out. Trev has done the changes to the speedo's as per Tim's comments and here's how they now look. I would appreciate any comments about any changes we might like done. I will be speaking to him about have the boost and oil pressure blanked out, so if we could leave that for now.

Z centre - http://www.zcentre.co.uk/suspension/rearshock.htm Or Mike's number - 01277-374201 Vijay

went to another branch of Halfords and again not listed. The lady there checked on the computers and they stock their own brand but do not have the Bosch ones listed for a 300. Does anyone know the codes by any chance? Cheers Vijay

cheers guys, got round my immediate problem anyway. Vijay

Hello guys, Am I right in saying that I can connect 2 pc's via the USB ports? Is it a special cable? Thanks Vijay

I thought using any sort of radiator flush was bad for the heater matrix:confused: :confused: Vijay

I did look at the bosch ones, but they didn't list them for a 300. I'll go to another branch and see. Thanks for the tip James. Cheers Vijay

Just went to Halfords and they don't list our cars :( does anyone know where I can get some decent fronp wipers? Cheers Vijay

well if you really want to buy them in the UK, then contact Mike Feeney on 01277-374201. He's usually the cheapest in the UK. Vijay

http://www.courtesyparts.com/z32/z32-tbkita3.html Vijay

just mailed someone your number:) Vijay

do a quick search and you'll see people use most of the common well known brands. I use Mobil 1 peronally. Vijay

are you OK with that price? if so I'll do it straight away. What price do you want for the lot? Vijay

If I'm right, it won't really matter if it's a series 1 or 2 fitment. I've looked at another instrument panel and it seems as though as long as the bottom 2 locations pins are used and the face is glued in the middle, then they should be fine - can anyone confirm that??? Secondly, We will have to mount an LED to work as the "low petrol" light as I don't think the lamp will shine through. I don't see that as a major issue as an LED can be mounted in the gray plastic front cover and should look OK (it would be easy to wire up to the bulb holder). Vijay

Stuart, the problem I would have is trying to convince him to make a small amount. He's having a bit of an issue cos when I first spoke to him, I mentioned larger numbers that I've got (oops):eek: :eek: I'll see what I can do though. The only problem I see is he'll have to take them off the production line at some point before the holes are cut. Again I'll speak to him and see what he says. Vijay

just need the changes done to the dials. I'd like to try and get the files to my supplier this week is possible. Cheers Vijay

Warren mentioned it in a post earlier this week how good the stuff is on the plastic, well I'm really impressed. I got my mum to bring me back some from the U.S and just tried it, it works a treat (I'm just full of puns:D :D ) Even on the plastic near the battery, nothing has ever got that black - well this stuff does!!! Vijay

very nice!! how long did they take? Vijay

TT Tim and Trey how busy are you? ;) Warren, what are you thinking of?? I can ask him and see what he says. Vijay

I don't see a major problem having the "Z" logo on the tacho. All I would say is that we have to kinda all agree on what we want. What exactly would you want on the covered gauges? Would you just want it completely blank or something written in it's place? would you want it lit up? and what would you do with the needles? Vijay

Buzz, no problem. I just hope I can get these sorted as I've been trying for nearly 2 years for these indiglo gauges. Tim, The comments are really appreciated. Thats why I posted the pics for things that may have been missed or wants changing. Vijay

Hello Tony, I just advertised a set on there and was offered only £80. Just to let you know. Vijay

and the rev gauge.

right, here's the gauge faces I'm gonna send to my supplier. Does anyone have any suggestions or would we be happy with this? Vijay

probably the nearest person to you would be Jeff at Zedworld. I believe he's in Tamworth - http://www.zedworld.co.uk/ Vijay