vijay

easiest way mate is to listen out for it while you press the door switch open and close. It's a blue relay on my car :) http://www.300zx.co.uk/cgi-bin/manual.cgi?list=el&dir=&config=&refresh=&direction=forward&scale=0&cycle=off&slide=113&design=default&total=133 Vijay

Hello mate, Just posted this yesterday: Right, been looking into this today and it might help to wire the inverter directly near the relay which is located in the rear passenger side panel. Hopefully this will help reduce the buzzing as it will be behind a panel and away from earshot 1. remove rear seat. 2. remove screw holding passanger side panel down and unclip panel enough to be able to reach in. 3. There are 4 wires on the relay, connect the red wire of the inverter to the red/black wire of the relay and the black wire of the inverter to the red/white wire of the relay. Would one of you guys who found the inverter located in the head panel a little noisy try this and let me know how you find it Cheers

this should help :) http://www.ttzd.com/tech/bushingstech.html

you can get a cylinder repair kit for around £50 :) Give Mike Feeney a call 01277-374201 :) Vijay

or the shocks themselves

Btt

I've got a new one for £250 if your interested :) Vijay

or do you know anyone who's going on holiday that can bring them back for you? Vijay

http://home.swipnet.se/e-solutions/Vacuumleak.html

Any update on prices? Cheers Vijay

my pleasure everyone :) Vijay

Yep, safe and sound will know how to do neat wiring in a Z and not just cram wires behind panels!!!

does this old post help? - http://www.300zx.co.uk/forums/showthread.php?t=17363&page=2&pp=15&highlight=jaz

these are the last 7 that were just sent :) thank god this is finally over!!! lol Turb0z Jeremy Steve-300zx Fastorquer Billy Nomates Mattotto Mrogers

showed your profile

BlackMagic, here you go mate - http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=880107 Vijay :)

hello mate, it's as simple as remove the maf and it'll only fit one way :) Vijay

Shipped today: Daz-zed Yaseen Paulbrem Celt1 Pete-tvm JonJon

The aftermarket gauges will come with their own sender units so no you don't have to disconnect the stock gauges :) Vijay

http://www.twinturbo.net/ttnettech/tc/tc02.jpg

http://www.300zx.co.uk/forums/forumdisplay.php?f=41

Hi Bob, Not at all mate but it's just the fair thing to do after 50 posts or so :) Vijay

have a look here - about 2/3rds down :) http://zhome.com/ZCMnL/PICS/stereo/stereo.html

Hi Dodge Viper, Might be an idea to sort your subscription out :) Vijay

yes mate :) http://www.ttzd.com/tech/bushingstech.html