As above... and where is it located .Many thanks Rich

th speed sensor is located in the back driver side of the gearbox held in place by a single bolt

th speed sensor is located in the back driver side of the gearbox held in place by a single bolt

 

Thanks ,Is it easy to fit?

yes mate just undo the bolt undo the electrical connector pull one out and put new one in may need a bit of wd40 as it is plastic into metal but should not be to difficult mate

dose that do the speedo because it only works sometimes

Told you rich, its probably the speedo head

Here you go :)

Dont think it will help your prob

 

My speedo can be intermittant but the ecu still gets a signal from the speed sensor

Told you rich, its probably the speedo head

 

I reckon it's more likely the speed sensor as there is no interference with the power steer etc..

I reckon it's more likely the speed sensor as there is no interference with the power steer etc..

 

If the PAS is fine and only the speedo is not working ? then its not the speed sensor, its mostly likely to be dry joints on the speedo cluster circuit or the speedo needle motor has failed.

If the PAS is fine and only the speedo is not working ? then its not the speed sensor, its mostly likely to be dry joints on the speedo cluster circuit or the speedo needle motor has failed.

 

Cheers for that...I've thought mistakenly for ages it was the other way round..Ok I will sart looking there

Told you rich, its probably the speedo head

 

Rich, Dave says buy a speedo...will sort your problem, listen to your friends:slap::tongue:

Rich, Dave says buy a speedo...will sort your problem, listen to your friends:slap::tongue:

 

What's that , Dave's going to buy me a speedo?

What's that , Dave's going to buy me a speedo?

 

LOL, no I dont think he will buy it for you, but says buy 1, he is working so cant reply:)

 

http://www.300zx.co.uk/forums/showthread.php?t=118475