Well it's fitted at long last!

 

 

 

Before.

 

 

 

 

 

After :D :hyper:

 

 

 

 

 

 

A closeup. Bear in mind these wheels are 18" there's not a lot of room left :eek:

 

 

 

 

 

 

Old vs. new comparison :wack: :smash:

 

 

:duffer:

Edited August 6, 200817 yr by dunk300zxtt

I want, I want, I want :shock:

this is a great upgrade. i would be interested if you were planning on producing a few kits. however i have a series 1 N/A. i guess i would need tt calipers too?

i may be interested if you're going to make up a few sets for £200 all in!

so whats stage 2 then? or stage 1 for that matter. and who made up this stage malarky?

The only thing is, these only just squeeze under 18" rims. I have some 17"s on the red car which I was going to try on just to have a look but there is no chance at all they will fit.

 

I've even had to put 3mm spacers on because the caliper slightly fouled the wheel spokes.

 

@ Alex, I think so yes. These discs are 30mm thick which is the same as the stock TT discs so I guess you would need TT calipers too.

 

@ Jimmy.... Stage 1 was sourcing the discs, stage 2 was working out and making the mounting brackets, stage 3 was fitting them :D

What can you do for the rear discs now?

What can you do for the rear discs now?

 

The rear discs are far more of a problem since they incorporate the handbrake mechanism.

 

This happens to be a shoes/drum assembly, so the chances of finding another car with all the correct dimensions are very slim I would think.

 

It took me enough time to research to find the front discs :mac1:

Rob,

 

As far as I know, the KSport 330mm discs are compatible with the stock handbrake mechanism. I can double check for you if that would be of any use.

 

Regards,

 

Dan

Yep they Ksport will fit but you will have to fabricate a bracket to fit with the std calipers

Goodwork dude! Made up for ya! Gotta be one of the best performance mods you can do on a Z... :bow:

is there any info on the discs. what and where to buy pretty please?? :) can make my own relocating brackets :D

Great work, may be back to you shortly regarding making up a kit. I'll be breaking in the V8 with the standard TT disc and pads/calipers but really want to get those willwoods on