I have heard a relay clicking behind the speedo/rev counter the past few weeks. I does it with no throttle i.e. when slowing down. When the relay clicks on and off the car jerks quite a bit as if you are quickly dabbing the throttle. I have checked and adjusted the TPS, the voltage was .444 and I've adjusted it to .452. Only a small difference. I now can't hear the relay behind the dash clicking but my idle is now around 1600rpm. Have I done something wrong or does something else need adjusting ? Does anyone know what this relay is for ? should the relay be clicking on and off depending on where the throttle is ?

 

CheerZ

Paul

Bump

^^up we go^^

this any help? http://300zx.co.uk/cgi-bin/manual.cgi?list=el&dir=&config=&refresh=&direction=forward&scale=0&cycle=off&slide=112&design=default&total=133

Just to change the subject Paul , Tesco at Hucknall is now selling the 99 ron petrol you asked about . :hyper: :hyper: :hyper:

Just to change the subject Paul , Tesco at Hucknall is now selling the 99 ron petrol you asked about . :hyper: :hyper: :hyper:

 

 

:hyper: :hyper: :hyper: :hyper: :hyper:

 

And just to add, the idle has now settled but the relay is still clicking and I'm still non the wiser on what it's for :confused: All seems to be fine now though.