:bow: hi there my 300zx tt z32 it starts and runs but as soon as you rev it hard or put your toe down is cuts out and has trouble starting again any help would be great thanx :headvswal

Look at the workshop manual on here. Its got a list of things to check when you have this symptom. Then once you've checked those things post up the results and people will be able to give you a more informed opinion. Hope it helps. Dave

Vacumme leak maybe?

yes, i think mine has a vacuum leak because i can hear a slight hissing when i turn the engine on!

plus when it's cold and i rev it a little it then chokes and cuts out!

are there diagrams for the vacuum pipes?

i played around with the temp sensor today and i thought it made this problem go away but alas, it did not!

still cuts out when warming up and with a little tap on the accellerator it dies.

bump

Have you checked for codes??? code be a few things, MAF for instance.

oh i see...would there be a code is the engine isn't breathing properly?

saw somthing on here once that explained how to get a code from the ecu by using a safety clip?

http://www.aus300zx.com/tech/ecu_diagnotic/ECU%20Diagnostic%20Switch.htm

 

HTH

cheers mate

thanks everyone il have a look at the manual

ooow foregot to say thanx 4 your help

it was the cam sensor come off lol sorted now though