I need your help guys and gals. I started exploring Dare Alloys and Azevs however the waiting times are a bit long as I need a full set sooner than later.

 

However, can you all give me some steer and recommend alloys with a fair bit of deep dish with 5 or even 6 spoke design. I am hoping for 19 inches. Ok, before everyone recommends Racing Hart and the exotics beyond my financial means, I was hoping for to buy them with a budget of about £1500 with tyres, ie. poor man's alloys range.

 

Any ideas and recommendations and also a supplier would be extremely grateful.

 

Thanks...

 

 

i got these from PPS, he is a member on here (leonardo), his number is 0191 510 3322

 

they are rota gtr alloys, 9.5 wide on the rear, 8.5 on the front, they are only 18's though, not sure if they do them in 19"

 

the price was £1120.00, give him a ring or pm if interested, he is a top bloke and may be able to help

http://cgi.ebay.co.uk/19-TOYOTA-SUPRA-NISSAN-SKYLINE-350Z-MITS3000GTO-300ZX_W0QQitemZ4644948083QQcategoryZ28648QQrdZ1QQcmdZViewItem

 

saw these on ebay today - I'm just getting my 18s refurbed - good job I might be tempted myself

 

Ken

 

I need your help guys and gals. I started exploring Dare Alloys and Azevs however the waiting times are a bit long as I need a full set sooner than later.

 

However, can you all give me some steer and recommend alloys with a fair bit of deep dish with 5 or even 6 spoke design. I am hoping for 19 inches. Ok, before everyone recommends Racing Hart and the exotics beyond my financial means, I was hoping for to buy them with a budget of about £1500 with tyres, ie. poor man's alloys range.

 

Any ideas and recommendations and also a supplier would be extremely grateful.

 

Thanks...

i have these wheels on my car...they are quite deep..hasemi prot gt's...only 18" though..once looked to see how much they cost from the hasemi site and nearly died of shock!

sorry but car is in work in progress!

I have just purchased AXE AP30's from leigh tyres they are 18 inch rims with a split 5 spoke design they cost £950 and have a nice deep dish i got 8inch front and 91/2inch rear, and they do look the nuts on the car. Unfortunatly not had chance to upload a pic of them, but you can check them out on POTN.COM they have them too for around the same price, i think you will like these wheels. Good luck

 

carl.

http://cgi.ebay.co.uk/19-TOYOTA-SUPRA-NISSAN-SKYLINE-350Z-MITS3000GTO-300ZX_W0QQitemZ4644948083QQcategoryZ28648QQrdZ1QQcmdZViewItem

 

saw these on ebay today - I'm just getting my 18s refurbed - good job I might be tempted myself

 

Ken

 

 

They look nice but with an offset of 20 they won't be right for a 300ZX or will need spacers or something.

Have you checked http://www.topgear.co.uk

20 offset is ok for a zed ive got 9"17" with a +10 offset on the front .The lower the offset the more they stick out and fill the arches.

20 offset is ok for a zed ive got 9"17" with a +10 offset on the front .The lower the offset the more they stick out and fill the arches.

 

 

Won't it cause accelerated wear to suspension parts or something?

 

I thought it was always best to keep the offset as standard.

I've got 19" TSW Catalunya's .. got them from a trader in Ireland 1800 euro including the tyres.. They took a while to arrive as he got them on special order for me but they are different to anyone elses Z. 9.5" rear 8 or 8.5 fronts . They are a gunmetal finish on the spokes and polished lip. I'm not sure if he can get any more at that price though as he is a friend of my mates so he did me a favour..I also bought a Pioneer AvicX1R off him so he had to give me a good deal :D