Been a while, taken 2 years for Nobles to complete my engine. finally got it back, but im not happy...
ok so here goes...
[iGNITION ON]
Not a problem
Batt Light ON
Anti Lock ON
Fuel Pump Check ON
Light (Works fine when brake pedal pressed)
[CRANK ENGINE]
Takes a few turns, but to be expected with a brand new engine...
[ENGINE RUNNING]
Batt Light HALF ON (dims gradually, but is always slightly on)
Anti Lock ON (for a while then goes off as Batt Light dims)
Speedo (Randomly just stops registering speed, goes to zero, never works again until re-ignition)
Turbo Gauge DEAD (see fuse issue below)
Power Steering RANDOMLY DIES and comes back to life when driving, worse if engines just started.
Light ON Permanently regardless of whether im pressing the brake or not.
I noticed a fuse had blown in the box on the right of the engine bay, the fuse nearest if you are in front of the car, so i replaced the fuse, WOAH, turbo guage works, COOL.... 2 hours later, nothing, popped fuse again...
ANY IDEAS??? Driving me nute.. :headvswal
(blue smoking too, bearing in mind i just spent £13000 on this fully steel engine) :rant:
Hi all,
Been a while, taken 2 years for Nobles to complete my engine. finally got it back, but im not happy...
ok so here goes...
[iGNITION ON]
Not a problem
Batt Light ON
Anti Lock ON
Fuel Pump Check ON
Light (Works fine when brake pedal pressed)
[CRANK ENGINE]
Takes a few turns, but to be expected with a brand new engine...
[ENGINE RUNNING]
Batt Light HALF ON (dims gradually, but is always slightly on)
Anti Lock ON (for a while then goes off as Batt Light dims)
Speedo (Randomly just stops registering speed, goes to zero, never works again until re-ignition)
Turbo Gauge DEAD (see fuse issue below)
Power Steering RANDOMLY DIES and comes back to life when driving, worse if engines just started.
Light ON Permanently regardless of whether im pressing the brake or not.
I noticed a fuse had blown in the box on the right of the engine bay, the fuse nearest if you are in front of the car, so i replaced the fuse, WOAH, turbo guage works, COOL.... 2 hours later, nothing, popped fuse again...
ANY IDEAS??? Driving me nute.. :headvswal
(blue smoking too, bearing in mind i just spent £13000 on this fully steel engine) :rant:
Regards,
Not a happy chap! John