Going to plumb in boost controler soon an i cant find any fitting instructions on the web for twin turbo cars .Is there any links of were to tee into the turbos .Thanks taff.

I have heard that you should get an 'expert' to fit a boost controller and not do it yourself. I have a Greddy Profec II B that should be fitted by Zedworld this week.

 

Anyone else fitted a boost controller themselves?

http://www.xspeed.com.au/manuals.php

This may help but I haven't looked at it closely.

Thanks mate looked at that link only shows single turbo fitting.

http://www.alltrac.net/manuals/

Again I haven't looked closely but may be on here?

Thanks for your help mate but the text is unreadable on the hks evc IV fitting instuctions on that link.

I presume you know the wiring loom connections??

 

with regards to the "plumbing" not as hard as you think ;)

 

take the smaller vacuum pipe and T into a vacuum source on the LHD of the balance bar

 

then you have 2 other pipes to connect, another vacuum (one with the filter) which you need to run to the front and then T off and plumb into another vacuum source before the throttle (theres a source on the black pipe just before the throttle which you can T into)

 

the last pipe again needs to T and run both pipes to the wastegates.

 

remember to unplug the OEM solonoids ;)

 

HTH

Mike

Here you go:

 

-Andrew

and a link for setting it up posted on TT.net:

 

http://www.twinturbo.net/cgi-bin/ttnet_viewmsg.pl?forum=main&msg_id=370473

 

-Andrew

Cheers guys.