Has anyone got any pics of their engine bay, after fitting the above ? The pic on Smithy's site is quite small

I'd like to see a decent sized picture of this as well, hoses just sat in the garage waiting to go on!

There are more pics in Smithys gallery section. http://www.smithys-place.co.uk/gallery.php

It really is a simple case of locating each vac/breather hose individually, pulling it off and cutting a new piece to suit and slip on again mate.

However I am looking for people who don't have certain products of mine to do write ups with pics to post on my website, am happy to give a set of either blue or red vac lines FREE to anyone who fancies doing this task. It would help if you know the general tech names of parts in the engine bay as well.

1st person to post here will get the lines sent out monday :)

cheers

smithy

It really is a simple case of locating each vac/breather hose individually, pulling it off and cutting a new piece to suit and slip on again mate.

However I am looking for people who don't have certain products of mine to do write ups with pics to post on my website, am happy to give a set of either blue or red vac lines FREE to anyone who fancies doing this task. It would help if you know the general tech names of parts in the engine bay as well.

1st person to post here will get the lines sent out monday :)

cheers

smithy

 

 

HOw much are they a set??

£28 delivered mate, thats for 3m of 4mm, 3m of 6mm and 2m of 8mm.

cheers

smithy

how much are your vac hoses for the brake servo mr smithy do you wont a write up on these ;) I have a N/A though I dont think there are many of them but can write as much as you like for free lol

It really is a simple case of locating each vac/breather hose individually, pulling it off and cutting a new piece to suit and slip on again mate.

However I am looking for people who don't have certain products of mine to do write ups with pics to post on my website, am happy to give a set of either blue or red vac lines FREE to anyone who fancies doing this task. It would help if you know the general tech names of parts in the engine bay as well.

1st person to post here will get the lines sent out monday :)

cheers

smithy

i'll do it for a red set smithy.

:bow:

is it all ok to do it on an na for the website bud?

And I will also do a write up with pics if you send me a blue set for an N/A mate, that way between me and Gaz it will give people ideas of what the different colours are like. LOL

i'll do it for a red set smithy.

:bow:

is it all ok to do it on an na for the website bud?

 

Hmm was kinda hoping for a TT motor, but no worries bud :)

Jim thanks for the offer bud, would ideally like a TT person on this as it would also cover the N/A's hoses

 

I am also looking for people to do the same with my fuel line kit, slam panels and headlight covers, Replacement IAA valve feed pipe and the full 4 piece brake/clutch silicone, so anyone interested in taking pics and writing a few words when fitting these, feel free to PM me. Please note though I can't warrant freebies on all these goods, but they will be dicounted a fair bit :)

cheers

smithy

headlight panels right here!!!! got the slam panel already, infact my bonnet is crammed with your products, got the slam panel, vacuum hoses, greddy side intercoolers, rps clutch and flywheel, turbo dynamics turbos and hard pipe kit. was told the previous owner (jonno) got all these bits from u, only thing im really missing is cf fan shroud and headlight panels happily give u a write up!

oh and ive got the fusebox cover! not wanting to sound like a free bits whore! but anything i dont already have id happily do a right up on, gonna be at every show going this year, back from iraq in a few weeks. j

Flippin eck mate, you have done well :D In that case will put yer down for panels and C/F fan shroud bud when yer back.

PM me when yer back mate

thanks

smithy

yee ha! youve made my day! ill pm soon as i get back and pick her up, gotta upgrade my membership, being out heres the only reason i havnt bothered yet. ill be in touch, cheers once again j

Smithy, I'm interested in the fuel line kit, IAA and brake lines (got an auto, don't have clutch!). PM with some prices and I'll decide whether I can fit them and do some words / photo's!

Smithy i have just ordered a full set of silicone pipes , brake servo pipes fuel lines

and something else pipe orientated ..cant remember what

 

when i fit them i will take photos and do a full write up mate

sorry for the 3 order forms ( 2 bollixed ones and proper one )

 

steve ( morecambe and kazakhstan )

by the way cheque is in the post :))) or will be on thursday friday next week

Hmm was kinda hoping for a TT motor, but no worries bud :)

Jim thanks for the offer bud, would ideally like a TT person on this as it would also cover the N/A's hoses

 

I am also looking for people to do the same with my fuel line kit, slam panels and headlight covers, Replacement IAA valve feed pipe and the full 4 piece brake/clutch silicone, so anyone interested in taking pics and writing a few words when fitting these, feel free to PM me. Please note though I can't warrant freebies on all these goods, but they will be dicounted a fair bit :)

cheers

smithy

mate if you want a tt motor then someone else can do it. keep the payment i sent. so a set of vacuum hoses in red please smithy