Happy Birthday Apache

Followers

August 4, 200520 yr

Have a good one Bud.........Vinz

Quote

Replies 28
Views 1.3k
Created 20 yr20 yr
Last Reply 20 yr20 yr

Popular Days

August 4, 200520 yr

All the best mate. See ya soon

Steve

Quote

August 5, 200520 yr

All the best mate :duffer: :duffer: :duffer:

Quote

August 5, 200520 yr

have a good one. :duffer: :duffer:

Quote

August 5, 200520 yr

lol...Theres a string of these at the mo....

Must of been a hot time of year all those years ago ;) :rofl:

:duffer: Happy Berfday bud :duffer:

Quote

August 5, 200520 yr

Many happy returns Phil.

Have a good one.

Quote

August 5, 200520 yr

Molest a large bottle of booze for me mate have a good un!!

Quote

August 5, 200520 yr

Happy Birthday mate! :)

Quote

August 5, 200520 yr

Happy Birthday

Quote

August 5, 200520 yr

happy birthday ,, get out of that simulator and eat some cake,,,, ... or better yet hover over gregs the bakers ,,,,land and scare all the staff and help yourself to all the cakes

!!!

have a goodun :duffer:

Quote

August 5, 200520 yr

Cheers chaps :duffer: :duffer:

Off to work now, will celebrate with sticky buns at playtime and then with a coupla shots of a nice malt whisky this evening :D

Quote

August 5, 200520 yr

Cheers chaps :duffer: :duffer:

Off to work now, will celebrate with sticky buns at playtime and then with a coupla shots of a nice malt whisky this evening :D

Happy Birthday mate, have a good day. Dave

Quote

August 5, 200520 yr

Happy birthday Phil.

Have a good un mate :)

Quote

August 5, 200520 yr

happy bday phil hope you have a good one will have a drink for ya later

Quote

August 5, 200520 yr

happy birthday bud!

Quote

August 5, 200520 yr

happy birthday ,, get out of that simulator and eat some cake,,,, ... or better yet hover over gregs the bakers ,,,,land and scare all the staff and help yourself to all the cakes

have a goodun :duffer:

Cakes have been eaten, simulator has been powered down, just off to fit my silvery rear bumper side reflectors and then will cycle home.

The missus is taking me out for a meal tonight - don't know where so will catch up with you all when I get back in and have me a glass of whisky - mmmm

Quote

August 5, 200520 yr

All I can do is "SIMULATE" what the others have said Phil. Have a good 'n'

Quote

August 5, 200520 yr

Happy Birthday buddy from Germany. We all wish you well!

[sIGPIC][/sIGPIC]

Quote

August 5, 200520 yr

happy birthday mate

Quote

August 5, 200520 yr

happy birthday fella

Quote

August 5, 200520 yr

appy birfday

Quote

August 5, 200520 yr

:dance: party!

have a good one bud

Quote

August 5, 200520 yr

happy birthday m8

see ya soon

Quote

August 5, 200520 yr

Thanks everyone :)

Just got back in from a nice meal out with the missus - gonna pour myself a nice malt whisky (or two) and enjoy the rest of the night. :dance:

Quote

August 5, 200520 yr

hope u had a gud night mate

Quote

August 5, 200520 yr

Happy belaited birthday pal. :)

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

Followers

Go to topic listing

No registered users viewing this page.

Replies 28
Views 1.3k
Created 20 yr20 yr
Last Reply 20 yr20 yr

Popular Days

No registered users viewing this page.

Weekend trip to France

Short stop over to Wisques Sat/Sun

By arthur · 7 hours ago7 hr
OEM Brake calipers - aluminium vs cast iron

Both the aluminuim & steel calipers suffer with piston issues.I rebuild them at work & would have done yours Richard if you had asked.A few hours is all it takes & a kit is about £60.I think Nissan used cast iron as a money saver only & not because of any benefits personally.Brembo discs here are made by Euro Car parts & are not the Brembo quality being honest.I would say they are no better than M tec that awful E bay brand.I use Blueprint discs for stock set up,s.I would try those .

By jimmer · 8 hours ago8 hr
ADAMZX's OEM+ 2000spec Version R Replica Conversion & Rebuild Project Build Thread

HYDRAULIC BRAKE PISTON RESTORATION PROCESS
The next phase of the brake caliper restoration process involves inspecting and restoring the hydraulic brake pistons that were removed from both the front and rear brake calipers.
The goal here is to put the pistons through one final cleaning process and then assess their restored condition to determine whether they can be reused or be replaced with brand new hydraulic pistons.

https://i.postimg.cc/Mph2qvG8/1_All_Brake_Hydraulic_Pistons_2_(Before_Polishing).jpg
(Above) The current condition of all the hydraulic pistons after undergoing a deep cleaning and de-rusting cycle in the ultrasonic cleaning machine.
Before beginning the restoration work, I took a closer look at several areas of the pistons that still required additional cleaning.
https://i.postimg.cc/P5BsTPqs/2_close_Up_Of_existing_rust_inside_pistons.jpg
(Above) Rust deposits still remaining inside the inner barrel of the hydraulic pistons.
(Below) Some staining or contamination present on the outer surface of the pistons.
https://i.postimg.cc/9Qv5Crfh/2_Staining_or_marking_on_outer_surfaces_of_both_front_and_rear_pistons.jpg
Grinding Process
To tackle the remaining rust deposits first, I attached a small brass wire brush bit to my Dremel and carefully began grinding away the corrosion. This method proved to be very effective at removing the rust while leaving the underlying metal clean and shiny.
https://i.postimg.cc/NjWqB50F/3_After_wire_wheeling_inner_barrels_of_all_brake_pistons_1.jpg
(Above) Nearly all of the rust deposits have now been removed from the inner barrel surfaces, revealing clean metal underneath.
https://i.postimg.cc/Mph2qvG7/3_After_wire_wheeling_inner_barrels_of_Front_brake_pistons_1.jpg
(Above) The front brake caliper pistons came out looking great, with all rust removed. Only a couple of pistons still show minor pitting at the bottom of the inner barrel.
(Below) The rear caliper pistons actually turned out even better than the fronts after the grinding process.
https://i.postimg.cc/fbm4LD3V/3_After_wire_wheeling_inner_barrels_of_Rear_brake_pistons_1.jpg
I’m very happy with how well the wire brushing process worked. The pistons have cleaned up so nicely that I’m now unsure whether I should paint the inner barrels or simply leave them as they are.
What do you guys think — should I paint them or leave them bare?
Polishing Process
Next, I moved on to removing the staining or contamination that remained on the outer surfaces of the pistons.
To do this, I set up my electric drill in a bench vice and attached a cone-shaped polishing wheel. This created a simple DIY polishing rig that made the process much easier to control.
https://i.postimg.cc/wBLKvgtt/4_Polishing_Setup.jpg
(Above) With this setup I can safely hold the piston while polishing, without having to manage both the drill and the part at the same time. This gives me much better control and allows me to polish the piston surfaces more effectively.
Here’s the starting condition before polishing the first piston.
https://i.postimg.cc/bvkXJpGg/4_Test_of_polishing_process_on_outer_surface_of_Brake_Piston_(Before).jpg
(Above) It’s a little difficult to see in the photo, but there is a thin ring of staining along the upper section of the piston’s outer barrel. The goal is to remove as much of this contamination as possible using the polishing process.
After about five minutes of polishing, the results were impressive. All of the staining on the outer barrel of the first piston was completely removed.
https://i.postimg.cc/SKC0skXM/4_Test_of_polishing_process_on_outer_surface_of_Brake_Piston_(After_1).jpg
https://i.postimg.cc/zfKmB8Lw/4_Test_of_polishing_process_on_outer_surface_of_Brake_Piston_(After_2).jpg
(Above) As you can see, the contamination that was present on the piston surface has now been completely removed.
All that remained was to repeat the process on the rest of the pistons. Just like the first one, the results were excellent. The polishing process removed all visible contamination from the outer surfaces, making the pistons look almost brand new again.
https://i.postimg.cc/q7yfR4t1/5_All_Pistons_Polished.jpg
(Above) The polishing process was quick, simple, and extremely effective. I’m very happy with the results so far.
After successfully removing the rust deposits from the inner barrels of all the pistons and eliminating the contamination on the outer barrel surfaces, I am satisfied that these restored brake caliper hydraulic pistons are suitable for reuse. They can now be reinstalled into the front and rear brake calipers during the final stages of the restoration process.

By DJ_Party_Favor · 13 hours ago13 hr
ADAMZX's OEM+ 2000spec Version R Replica Conversion & Rebuild Project Build Thread

This month I wasn’t able to dedicate as much time to the project as I had hoped, but I still managed to make some progress. The focus was on cleaning up and polishing the hydraulic pistons in both the front and rear brake calipers.
These components still had varying amounts of residue and rust buildup left over from the earlier cleaning and de-rusting process, so this stage involved carefully removing the remaining contamination and improving their overall finish.
YouTube Channel: https://www.youtube.com/@ADAMZX Instagram: instagram.com/adamzx_z32

By DJ_Party_Favor · 13 hours ago13 hr
OEM Brake calipers - aluminium vs cast iron

As per the "what did you do" thread I had to source a pair of replacement front calipers today, as mine have seized on the lower inner piston on both sides.
After searching the 'net, I found a couple suppliers had them in stock. First being Torquen - albeit at over £600 for a pair for either cast iron or aluminium.. Then I found some fully rebuilt aluminium ones (the correct fitting for a TT) at less than half that, which got me thinking. Cast iron vs aluminium....??
Both seem to have their merits and drawbacks - the ali ones being much lighter, so less unsprung weight - whereas the iron ones allegedly handle the heat better, reducing the chance of disc warpage. If one believes everything one reads on the interweb LOL!
Seeing as I don't track the Zed - and I am happy with the OEM set-up, when it works properly, plus I have a set of Brembo discs waiting to go on, as opposed to the Ebay ones I had previously, I thought the ali calipers would suffice.
Opinions please - good or bad😁

By RichardS · Thursday at 21:352 days

Happy Birthday Apache

Top Posters In This Topic

Popular Days

Featured Replies

Join the conversation

Recently Browsing 0

Top Posters In This Topic

Popular Days

Recently Browsing 0

Popular Posts

Weekend trip to France

OEM Brake calipers - aluminium vs cast iron

ADAMZX's OEM+ 2000spec Version R Replica Conversion & Rebuild Project Build Thread

ADAMZX's OEM+ 2000spec Version R Replica Conversion & Rebuild Project Build Thread

OEM Brake calipers - aluminium vs cast iron

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)