Help! I've just changed my aircon readout and it still won't read properly

any suggestions from anyone who has had the same problem>

Markz

Help! I've just changed my aircon readout and it still won't read properly

any suggestions from anyone who has had the same problem>

Markz

When you say 'Wont read properly', what exactly does it say? Or are you saying that there is no readout at all?

Try this LINK for the diagnostic on non-illumination of the Set & Ambiant Temperature Display, it might be your solution.

 

HTH

When you say 'Wont read properly', what exactly does it say? Or are you saying that there is no readout at all?

Try this LINK for the diagnostic on non-illumination of the Set & Ambiant Temperature Display, it might be your solution.

 

HTH

I seem to get the amb temp ok but only 2 upright strokrs at the top of the screen

Assistance much apreciated.

Markz

I seem to get the amb temp ok but only 2 upright strokrs at the top of the screen

Assistance much apreciated.

Markz

 

 

The screen has probably blown or something. They dont last forever.

 

Ask one of the parts traders how much for a quality used replacement.

I just bought this one from pete shrimp put it in yesterday

Markz

Well if the old one was doing the same as the new one, then I'd sugest that, maybe, your Air-Con Amp module is defective. But you'll have to try another member for that, as I've got the one from Pete :D And I must get around to fitting it, as it's really bugging me now not knowing what the temp is :D

Well if the old one was doing the same as the new one, then I'd sugest that, maybe, your Air-Con Amp module is defective. But you'll have to try another member for that, as I've got the one from Pete :D And I must get around to fitting it, as it's really bugging me now not knowing what the temp is :D

What does it look like and where the hell is it?

Markz

What does it look like and where the hell is it?

Markz

Right, after a lot of research (because, there are no pictures, diagramms or postions listed in any manuals), it is located behind the drivers left hand center consol footwell panel. It is a black box about 15 cm x 10 cm x 4 cm, mounted on a metal bracket. And apparentley it's difficult to get out. Have a word with Pete Shrimp for any more details, as he took the one out that I have now.

 

HTH

Right, after a lot of research (because, there are no pictures, diagramms or postions listed in any manuals), it is located behind the drivers left hand center consol footwell panel. It is a black box about 15 cm x 10 cm x 4 cm, mounted on a metal bracket. And apparentley it's difficult to get out. Have a word with Pete Shrimp for any more details, as he took the one out that I have now.

 

HTH

Thanks for your help Dave.

Markz

Thanks for your help Dave.

Markz

Mark, as I'm back at home tonight, here are a couple of pics of the Air-Con Amp unit.

 

HTH