Skip to content
View in the app

A better way to browse. Learn more.

300ZX Owners Club

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Erratic runner

300 n/a 1991 auto has had problems with selecting gear at too high revs also the engine tends to surge between 1500 to 2500 revs on light throttle when you give more revs this tends to dissapear

 

have changed tps and temp sensor but no fix

 

any ideas

Featured Replies

> 300 n/a 1991 auto has had problems with selecting gear

 

Does it change gear as soon as back off the throttle ?

It might be a dodgy sensor in the box or wrong adjustment of the TPS.

otherwise gearbox most likely needs a rebuild.

 

> the engine tends to surge between 1500 to 2500 revs on light throttle.

 

Tried resetting the ECU ?

also check O2-sensors, neutral switch and closed throttle switch.

 

> have changed tps

 

Have you set the new TPS to the correct voltage (0.40-0.46v at closed and >4 volts at full throttle) and reset the ECU after replacement ?

 

-Eric

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Terms of Use

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.