There's a hole above the inertia reel for a screw/bolt which I don't have. What sort of screw/bolt goes in there?

 

Thanks,

Mooch

There's a hole above the inertia reel for a screw/bolt which I don't have. What sort of screw/bolt goes in there?

 

Thanks,

Mooch

 

I fitted some rear belts last year but not to sure of the size. It's nothing special though. Must be fitted though or the real will swivel and cause the bob weight to lock out.

 

Jonce

I believe its a ten mill (ten mill head) self tapper :)

Thanks guys. Will give the 10mm self tapper a go.

 

I believe its a ten mill (ten mill head) self tapper :)

One other thing - angles of belt anchoring points. Do the side lower anchors face forwards, sideways or backwards? Do the middle anchors face downwards or upwards (i.e. where is the bent in lip relative to the middle anchor bolt)?

 

There seem to be two raised ridges on the the side lower anchor points on the body. How do the side lower anchorages lie relative to those ridges?

 

If you know what I mean.

 

Thanks

Mooch

Well the 10 mm self tapper didn't work.

 

One other thing - angles of belt anchoring points. Do the side lower anchors face forwards, sideways or backwards? Do the middle anchors face downwards or upwards (i.e. where is the bent in lip relative to the middle anchor bolt)?

 

There seem to be two raised ridges on the the side lower anchor points on the body. How do the side lower anchorages lie relative to those ridges?

 

If you know what I mean.

 

Thanks

Mooch