Jump to content

Recommended Posts

Posted

Right so drained my autobus after overfilling it! Luckily mine has the drain plug so we were able to do it the easy way. Roughly 4 litres were removed before it stopped coming out the drain.

Drain plug refitted and we filled it with a litre and checked the level on the dipstick and we go correct readings (5times) when warm and when cold.

 

This just doesn't seem right as we only put a litre back in? Can anyone advise on how this can happen I'm so confused :)

Posted

Normally we used to fill with around 3.5 litre after fitting drained box as some was left in pipeline cooler and torque convertor. However as you overfilled the cooler lines and torque convertor will be completly full, so with a litre fill plus starting to half empty the torque convertor ( 2 litre ) you almost there. Run up through the gears and check whilst hot and running in park, sounds like your almost done.

 

Jeff

Posted

Thanks Jeff.. will double check tomorrow. Have you ever known an overfilled box and what symptoms did you see? I seemed to be getting bouncing off the limiter when burying it.. obviously I didn't know it was overfilled :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

Terms of Use