I have a clonk on my drivers side, which I think to be my front upright (not fully investigated yet)

 

My questions are, where do I get one for a reasonable cost? Are they serviceable?

 

https://conceptzperformance.com/blog/wp-content/uploads/2015/08/FrontSuspension.png

 

I can find lots of camber arms and adjustable parts, just not this.

Thanks

Mark

With regards to the clonking. Take a very good look at where the tension rod meets the lower arm, those poly bushes you have fitted can cause the arm to crack around where the tension rod bolts up

Got me worried now Groover - MOT this afternoon and a couple of my gaitors not great. Checked MOT guidelines and got the info below.

Reasons for rejection. (No mention of gaitors). All due respect to your knowledge but I hope you're wrong lol

 

1.

 

a. no shock absorbers fitted to a vehicle on which they are standard

 

b. a shock absorber missing

 

 

 

2.

a. External damage or corrosion to the casing of a shock absorber so that the unit does not function

b. an insecure or detached shock absorber.

 

 

3. A fluid leakage serious enough to indicate that the fluid seal of a shock

absorber has failed.

 

 

4. An excessively worn shock absorber linkage, pivot or bush.

 

 

5. A shock absorber which has negligible damping effect.

 

 

How did the MOT go? Im going from past experience lol with MOT stations, but as has been said it depends where you go and how he feels on the day