Can someone tell me where the powersteering hose is please with pictures would be great. Many thanks. It's because I have a leak. Cheers again

Edited June 4, 201510 yr by raph1982

Its most likely the pipework that comes from the power steering reservoir. The pipe goes down into the engine bay so its hard to find any leaks.

 

http://www.z32photoguide.com/powersteer.html#psfrloc

Thank you

Pot, to pump via a roughly 1" diameter pipe. This is a preformed unit, it can be replaced with general hose with a 90 elbow that's how mine is, parts hyphose. Then a high pressure feed line that runs down from the pump to the rack, these rust at the bottom and leak. Mine was reconditioned by thread and pipe. Then there's a low pressure line from the rack to the pot via a hard tree, again replaced with hose from hyphose.

The pump itself has two top mounted I rings that can fail, and a pair of body gaskets. With the NA there's only one circuit and access us easier. Clean it off with WD then pop a piece of board etc under the bay and turn the engine on. Then trace the leaks origin.

Cheers