Hi all,

 

I'm having the seats I bought installed on to the original electric runners.

This was previously done on my other zed that worked.

 

Since the seats have been fitted to the new Z they are not working! Is there a link wire to be added since the other 2 motors are now missing or anything else we need to do?

 

Thanks Dan

Edited June 2, 201510 yr by GIBSTER-TT

Are you using the original switches? The wiring to the seats is very basic, literally live and earth, so if you have a feed and its not working then something in the switches or loom to each motor.

 

Need a bit more info or pics lol

Hi yes all original runners just swapped the seats over. Minus a few motors that are built into the oem seat. The motor built in to the runner for forward and backwards hasn't been touched.

Have you used a meter to determine if you have power to the feed of the switch/motor?

No not yet it's not me doing it. I'll find out what's been done tomorrow. Thanks

Ok tell him to use a meter and first determine that you are getting power to the switch, at least then you can move to the switches themselves and associated wires

Thanks groover will pass on the info.