Hi guys it's been a while, think my ecu has broken, fat friend of mine sat in the passenger seat and kicked it car then tired off and hasn't started since. Spark plugs are clean and there's no spark or fuel going in. So pretty sure it must be ecu. It's been mapped so il

Have to also solder my mapped chip into the new ecu unless someone has one with an adapter already fitted?

Anyone?

If it is that it'll be pretty obvious once its open. You got a jewellers loupe?

Have you checked the ecu harness plug is fully and correctly seated in the ecu socket

and the individual ecu harness wires have not been pulled/broken from the plug?

 

Was the wooden kick board not installed?

Stick a stock one in briefly without he map. See if it starts. If it does you've found the fault, get soldering.

 

Especially as they are cheap as chips. If it isn't the fault sell it to Noel so he can get his gold toilet seats.

Managed to ave the ecu, took it apart and noticed the IGN circuit had a burn out connection so I soldered it back to health. Started up a Gooden. Picked the cars up at night and got into a naughty race with a new lambo, he couldn't leave me hah. Everytime he put his foot down I responded and caught up. I forget how quick this thing is.

Sorted :thumbup:

Got any up-to-date pics?