In preparation of my new wheels arriving I think I need to order some adjustable camber arms for the rear. My question is in order to dial in a little extra camber do I also need to order the small straight arms (rear traction arms?) or can I get away with just the camber arms?

 

thanks for any input!

i had to get rear camber arms for mine buddy, the bolts only give 1 or 2 degrees, not something i found noticeable. Also i got rear toe adjustable arms too as you will toe in with negative camber.

I just got everything so it would work for sure...

 

Thanks guys, nice setup zed racer, I can't afford the full DW kit at the mo! Adam are the toe arms the short ones?

This is the exact setup as I've got too and with my 19's I have them adjusted

perfectly to the contours of the car without the need for any spacers.

 

I just got everything so it would work for sure...

 

[ATTACH]80824[/ATTACH]

The short arms are traction arms I have japspeed ones on mine they adjust the rear castor but only slightly shouldnt need these if you just want to dail in camer to tuck tyres under arches .the longer ones are toe arms for na subframe set up ie no hicas.

Not sure if these small traction arms adjust castor the net says castor is for front only .think these small arms don't do much at all if anything ,it does mention bump steer correction on very low cars .

Thanks Taff glad you mentioned NA being different as that's what I've got

Thanks Taff glad you mentioned NA being different as that's what I've got

 

On my set up( NA of course )I have adjustable top arms and adjustable rear arms(the long ones referred to commonly as toe arms)

Then you can set rear camber and toe in/tracking. This was done without any issues. I didnt get the short front adjustable ones as they arent really necessary. Nice extra if you have them tho.

Thanks guys, nice setup zed racer, I can't afford the full DW kit at the mo! Adam are the toe arms the short ones?

 

no buddy the adjustable toe are the rear ones, as i knew you had an N/a and didnt have hicas you wont have adjustable track rod ends. as pete said, i didnt find the short ones a necessity so only have adj camber and toe. i got the adj SPL/SPC (the cheaper of the 2 sold from z1)