Bit of update
so while on the dyno we discovered a few drops of oil under the car. A bit of investigation reveals the most likely culprit is a cam seal…. Annoying! So at some point I’ll have to pull the front of the engine off and install a new seal.
I’ve also been speaking to Brett at BDE and will be purchasing his now PS pulley for ATi crank pulley, which will resolve the issue of it spitting off its PS belt.
I’ve also been going through the datalogs of some of the drives I’ve had to identify the cause of the imbalance of fuelling between banks. While I’m not sure it’s totally the cause, I have found that the alternator is not keeping up with demand. While the pic shows voltage drop during a pull down to 13.06v, wider analysis identifies a direct correlation between the fuelling of the engine and the electrical systems being above or below 13.5v. So I’m going to have my alternator inspected, and if it’s performing as expected I’ll either look at having it uprated to 120amp (to offset the 24amp draw of the 525lph pump) or if that’s not possible I’ll look to upgrade to a 200amp unit from WPS or WOSP.
By
nickz32 ·
Many members had ask us about offering finance as an option to help spread the payment.
We are happy to announce that we are able to offer retail finance starting today with V12 Finance.
We are able to offer 0% interests free finance for 12 months on all MeisterR and Enkei products.
£0 down mean you don't even need to put a deposit down, your first payment won't start until 30days after you receive your goods.
What that mean is you can get your hand on a set of Zeta-S today for under £59 a month!
Sounds Great, but how do you do it?
Setting up the finance couldn't be easier.
1. E-mail us at info@cyberspeeds.com with what you want and how much you want to finance.
2. We will put your details into the V12 Finance system.
3. The V12 Finance system will automatically send you an E-mail with links to complete the finance application through their secure system.
4. You will get an instant decision on rather you are approved or not.
5. Once approved, we will send the goods out to you… JOB DONE!
If anyone have any questions, please feel free to PM or E-mail us.
Jerrick / Edwin