Pinch or bleed valve for manual boost?

April 1, 201412 yr

Which do you use on your z? Which is more reliable and safer? Or is there no difference??

Cheers

Quote

April 1, 201412 yr

Bleed valves are old school really you want a electronic boost controller a lot more accurate and reliable

Quote

April 1, 201412 yr

Like a Greddy Profec B Spec II 2 Boost Controller. That's what I use. can't fault it.

Edited April 1, 201412 yr by zed-racer

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

UK TT Manual Project

Those top two don't look right 🤣

By JaiKai · 4 hours ago4 hr
UK TT Manual Project

New spark plugs. The old ones don’t look bad at all to be fair.

By RobHowl · 4 hours ago4 hr
My daughter calls it Toothless the Dragon: My ‘95 TT Z

By nickz32 · 10 hours ago10 hr
My daughter calls it Toothless the Dragon: My ‘95 TT Z

Crank back from OCS and happy to report she’s straight as an arrow with less that 1 micron of runout.
went with Torco MPZ assembly lube after numerous recommendations from engine builder friends of mine.

Main bearing clearances came up nice and even at 0.0026” give or take a couple of ten thousandths, and the crank spins over nice and smooth

By nickz32 · 10 hours ago10 hr
JaiKai - MK2 - Ziggy Build

Also start to attach all the auxiliary hoses like the water pipes and vac pipes.
However thinking this would be simple would be wrong; things have been scattered over the years and a few of the pipes are missing.
So thought i'll crack on to the plenum so i fitted the fuel rail down nice and snug.
Next issue we have - Spark plugs - no-where to be found !!
So looks like i'm building another list of parts thats needed.

By JaiKai · Monday at 12:532 days