Me again.
Reverse lights don’t work. Checked the bulbs and the fuse by the drivers pedal, all seem fine.
So I assume it’s the reverse switch. I’ve bought a spare and tried to swap it today. What a pain that is! I failed.
So I have two questions:
Is this possible without dropping the gearbox?
I wanted to test it was definitely the switch before I went crazy getting it out, so unplugged the old one and plugged the new one in, put car in reverse and switched on ignition and then pressed the end of the switch in but it still didn’t turn the lights on. Does the switch work this way? That you can push the plunger end in and it should turn on?
By
RobHowl ·
Hey Folks!
Check this out-I´m a bit confused about this; got this pic from ZNATIONALS, rear 99 spec lights,
Maybe is just my imagination but does anyone noticed that both upper and low are whites on the first Z? confuses me
cause on other rear 99 spec lights Z, upper is red and lower is white...like the green one.
attached you will see what I mean; take a look at the first Z and the second; don´t you see a difference
on the lights? first I thought maybe they also have the spec 99 lights in both white..but now I am lost or perhaps is just my imagination.