.............car will not crank! I guess its because the car thinks its in park,would I be correct! and if so what do we need to do ?

 

We can run live feed to the starter and there's no probs there.

 

This is not for my car by the way:blink:

 

Dave

you need to sort out the inhibitor switch, there is a write up here somewhere, i was looking at it earlier.

ok its missing some of the photos now, but you might be able to make head or tail of it

 

http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=1001493

theres is a relay that sits in the drivers wheel arch behind the cover ..

 

2 of the wires need to be connected together

Edited June 4, 201213 yr by MarkDerby

:rockon: Thanks Vods will look at that tommorrow:thumbup1:

Thanks Mark..:thumbup1: top man

hope this helps

hope this helps

 

that grey plug is where it goes to inhibitor cut it of and join the black and brown together then plug back into the loom that is still in the car should be on drivers side of gearbox

that grey plug is where it goes to inhibitor cut it of and join the black and brown together then plug back into the loom that is still in the car should be on drivers side of gearbox

thats the one on the rightjust after the white insulation

Cheers fella:thumbup1:

Thanks guys my mate went back to his car and did what was suggested and all is working fine.

 

Thanks for all the help great response as always what a excellent club:rockon: