guys I know that there are a few threads about this, but I can't find enough pics to help. I'm fitting my Decats having removed all the exhaust I have undone the 2 lower nuts on the drivers side turbo, but for the life of me I can't seem to find the the lower passenger side nuts :blushing:

 

Driverside

 

 

 

 

Passenger side under side

Edited March 4, 201213 yr by bigh

have you taken the boost/hard pipes off from the top ... its tight but u can just get your arm/hand down there to do the top bolts

 

edit ..sorry i see u said passenger lower ones ... u can get to them easy from below and same with top ones ^^^^

thanks Mark, are you saying that I need to take the hard pipes off for the drivers then?

 

I can't even see the passenger side lower bolts as the shielding around the downpipe seems to be in way.

 

Found these pics here

 

http://i863.photobucket.com/albums/ab199/rautoshop/300zx/z127.jpg

 

http://i863.photobucket.com/albums/ab199/rautoshop/300zx/z128.jpg

first pic bolts look to be the Turbo Core bolts not the downpipes ...

 

edit thay look like gearbox bolts too

 

2nd pic is the backet brace for the gearbox .. Not those Bolts ..

on the turbo downpipes .. that your trying to take off will have 2 nuts and 2 bolts per turbo ..

these are on the down pipes them self ..

u can undo two from the bottem and 2 from the top ( per Turbo )

to get to the Top Bolts u need to take off the Black Turbo Pipes from either side of the engine