Could somebody please describe the necessary components required to achieve a stance not to dissimilar to this, I gather that it has Meister coil overs, but what about spacers, wheel sizes, wheel widths, tyre sizes etc ... much appreciated as hoping to achieve something similar on mine (probably with more ride height) ... because it looks tasty. :)

 

From the thread: http://www.300zx.co.uk/forums/showpost.php?p=1403360&postcount=2

 

well as thats andy isherwoods ride, check his ride section. or old posts, im sure its going to be in there somewhere.

Oh thats a good idea, I did wonder who it belonged to. Thx.

its only that low because of all the heavy bling under the bonnet....chrome everything and what you dont chrome polish till it loks like chrome and you dont ned to buy the susspension bits.......aint that right Andy :) :)

Hi Tommy,

 

Wheels are 8.5 and 9.5 inch staggered. That picture has a 25mm spacer on the fronts which looked amazing but rubbed on bumps sometimes. They were replaced with 20mm spacers and it's fine now.

 

I would advise going with the Miester coilovers first to drop the car where you want it (get the camber re-set etc at a laser wheel alignment place) and then see what clearance you have and space accordingly. You would need to invest in adjustable top arms for front and rear and toe arms for the front.

 

I would also recomend getting your rear wheel arches rolled. I used arch enemy for this.

 

Andy

its only that low because of all the heavy bling under the bonnet....chrome everything and what you dont chrome polish till it loks like chrome and you dont ned to buy the susspension bits.......aint that right Andy :) :)

 

I never did like you!!!!

 

FYI there are only two items chromed under there - balance bar and coil packs!!

 

Everything else is stainless or polished ally:tongue:

 

Now off you go for a nice stroll across Morecombe Bay.......The tides due in soon!!!:2guns:

LOL.......now thats not nice Mr Isherwood .......spelling Morecambe MORECOMBE .....im off to check the tide time tables ....for Sept 13th when im due back in the uk .....

i could go for a few steps in the Steppe if you prefer :) :)

oh by the way Andy ...look at out posts counter !!!!!

Hi Tommy,

 

Wheels are 8.5 and 9.5 inch staggered. That picture has a 25mm spacer on the fronts which looked amazing but rubbed on bumps sometimes. They were replaced with 20mm spacers and it's fine now.

 

I would advise going with the Miester coilovers first to drop the car where you want it (get the camber re-set etc at a laser wheel alignment place) and then see what clearance you have and space accordingly. You would need to invest in adjustable top arms for front and rear and toe arms for the front.

 

I would also recomend getting your rear wheel arches rolled. I used arch enemy for this.

 

Andy

Andy, dont forget to state your offsets, info is meaningless without it.

 

I'd guess 35 all round before the spacers ? .....giving you 35 rear, 15 front with the spacers

Edited August 24, 201114 yr by Yowser

oh by the way Andy ...look at out posts counter !!!!!

 

Oooooohhh!

 

Spooooky!!!

Andy, dont forget to state your offsets, info is meaningless without it.

 

I'd guess 35 all round before the spacers ? .....giving you 35 rear, 15 front with the spacers

 

I would have but I don't have the wheels any more and can't remember the offsets.

 

I'm sure a good search on here will reveal some recommended offsets.

did it not rub on full lock etc? i have 19s on and im sure if i spaced them out it would rub on full lock :wack:

did it not rub on full lock etc? i have 19s on and im sure if i spaced them out it would rub on full lock :wack:

 

No Bud, they are fine.

Soo err, the wheels in the pictures, they are 19"? All very useful info, thanks all. Definitely some food for thought. :)

Soo err, the wheels in the pictures, they are 19"? All very useful info, thanks all. Definitely some food for thought. :)

 

They are 18's in the pictures and also my signature pic.

 

Good luck and keep us updated!

 

Andy