do the N/A models have the hicas system on them

do the N/A models have the hicas system on them

 

nope, twin turbos only.

cheers need to find where the vibrations coming from

What speed does it come in at? a few things on a N/A

 

Wheel balancing.

Center bearing on the prop shaft.

Warped disks.

Warped calipers.

about 35-40

im thinking it could be the brake not sitting corrctly changed the pad not long ago

Did you do the calipers up tight enough?

i feckin hope so..lol.

no they were all do tighly

its only one side the vibs coming from

im gonna eats somthing then go check its all done up properly..should be coz im proper thourogh when it come to parts that stop you

i feckin hope so..lol.

no they were all do tighly

its only one side the vibs coming from

im gonna eats somthing then go check its all done up properly..should be coz im proper thourogh when it come to parts that stop you

 

LOL same here, strange that i changed my brake pads the other day, and now have a hicas fault that the MOT guy thought was a wheel bearing, i did the same thing, went out and scrutinised my work till i tracked down what the real issue was.

Centre prop bearing vibrates coming up to 40mph.

is that an expensive fix

Well you have a couple of options, a well known second hand one, preferably still attached to the front section of prop, then its real easy to change.

Bearing on its own, need a press or puller to get the old one off and new one on.

The best long term option is to go for a one piece prop from JeffTT. It will cost you around the same for a new bearing and have it fitted.