Hi ya'll, been hammering this forum today, many helpful replies too!

 

Should I get one of those in-line pipe efforts with the threaded hole for the water temp sensor (aftermarket), if so, where should I put it? It should be at the top of the coolant system, only one pipe, but it has a bend in it, would I be able to bung one in there? And what size is the pipe (internal diameter)?

 

Thanks again, ooh, anyone got a picture of one of these fitted?

 

Cheeeerrssss....

anyone?

http://i86.photobucket.com/albums/k107/dredz32/IMGP4104.jpg or http://img45.imageshack.us/img45/2346/1001872os4.jpg or http://img403.imageshack.us/img403/2715/cablemanagement3tf3.jpg http://img403.imageshack.us/img403/4701/cablemanagement1lx3.jpg

top man groover :)

I´m sure I read somewhere it was better to put the sensor on the lower hose as opposed to the upper hose as the upper hose would give the reading of the water temp after it´s been cooled through the radiator ..or m I comfusing something there ?

The ecu temp sensor and original are in the top hose location, so i would presume them to be the best place.

yeah, makes sense, as the water in the lower hose is from the arse end of the radiator, so would give you a cooler reading, and ya wanna know the hottest reading so ya know if owts going kaput!