What Spacers?

Followers

July 16, 201015 yr

Hi there Guys,

Just a quickie question, what size spacers will I need with the wheel sizes below? It's on std. suspension at the moment but will be lowered on coilovers in the future.

I am looking at the hubcentric's with the built in bolts.

8.5 J X 18" 5X114 ET35 FRONTS

9.5 J X 18" 5X114 ET35 REARS

Many thanks, Rob

Quote

July 16, 201015 yr

i would say about a 15 on the front and maybe a 5 on the back

Quote

July 16, 201015 yr

15 front

Rears are perfect.

Quote

July 16, 201015 yr

As above. Rears are cock-on.

What tyres are you running? Ideal widths for those wheels are a 245 up front with a 275 at the rear to give you a nice flat tyre wall with no stretch.

Quote

July 16, 201015 yr

Author

Cheers all,

Si - Tyres are 235/40/18 front and 265/35/18 rear.

Quote

July 16, 201015 yr

Get some wider tyres on. It'll look heaps better. I had those on mine before I went for wider ones.

Quote

July 16, 201015 yr

Author

I'll burn these out and go for your recommendation

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

Followers

Go to topic listing

No registered users viewing this page.

No registered users viewing this page.

Hi all - New (returning after 20 years)

Hi guys
I thought id jump in and say hi 👋
Im currently thinking of re entering the zx world! I had one 20 years ago and still think they have a timeless look to them... ultimately i love 90s/2000s Jap cars and have been in and around the Honda scene for a long time now, starting with Dc2s and then onto S2000z (which im currently still enjoying thuroughly).
I am super tempted to get a Manual TT the only thing in my head is that I havent actually sat in one in over 2 decades and whether my past memory of the drive would live up to reality?? 🤷

Anyway glad to get back onto a forum...im super sick of Facebook groups tbh 🙃

Located im Bucks South East.

By Wolfpack · 12 hours ago12 hr
Reverse switch problem

Have you got the right one? The neutral switch and reverse switch are close together and look similar.

By Stephen · Yesterday at 09:421 day
UK TT Manual Project

Well I thought things were going too well. The underside has come up well and is looking a whole load better now.
Turns out pre 2009 cars don’t need reverse lights to work to pass an MOT, so I can solve that problem another day. (Switch is working fine, but no signal getting to the rear)
New tyres delivered yesterday and I can just run them down the local fitting shop and have them fitted.
So I thought to myself, I’ll throw on the new pads and discs tonight, and she will be ready to go!
Then the brake pipe broke from the calliper and I had a sense of humour failure.

By RobHowl · Thursday at 22:202 days
Simply Japanese at Beaulieu 19th July 2026

I was just completing my booking but realised that it’s one of my daughter’s 16th birthday! I’ll check what she’s up to and see if I can get a pass! She may come with me, but doubtful. Will update as soon as I know.
Steve 😁

By cybernet · Thursday at 00:003 days
Check engine light comes on and off sporadic.

Those codes are all pointing at a related issue. A/F ratio falling out of range, heater elements within the O2's out of temp range, EGR sensor or exhaust gas temp falling out of range, etc. There is a few areas to consider...
Was any work recently done to the car that may have triggered this? When was the last time you replaced the O2 sensors? Check the O2 connectors and wiring to make sure one of them hasn't contacted the exhaust or melted. Any exhaust leaks especially before the cats? When was the last time you performed an induction service and cleaned the intake, TBs, IAC, etc? The EGR and IACV love to get carbon buildup over the years and can affect flow, similarly can happen to the vac lines to the factory wastegate control solenoid. You mentioned the car felt like it was still running well, so no idle RPM fumbling, hanging, stumbling, etc? Are you running an aftermarket boost control solenoid or OEM? Sorry for the load of questions, but need a bit more to go off of to help point you in the right direction.
Even though the vehicle has considerable low mileage, it's still 30 years old. If it's kept in a garage it tends to handle the elements better than sitting out in the external environmental conditions and will need more routine maintenance and care regardless if it's being driven or not. (i.e. 60K / 120k maint w/ timing belt)

By protoj · Tuesday at 18:484 days

Sign In

What Spacers?

Featured Replies

Join the conversation

Recently Browsing 0

Recently Browsing 0

Popular Posts

Hi all - New (returning after 20 years)

Reverse switch problem

UK TT Manual Project

Simply Japanese at Beaulieu 19th July 2026

Check engine light comes on and off sporadic.

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)