Just a quick one. Where have most plumed their oil pressure gauge into. I know you can get the plates that go between the filter and housing but are they any good??

 

Cheers All:bow:

i use a greddy sandwich plate for oil pressure but you can use the place in picture i use it for oil temp sender.

 

dan.:)

sandwich plate is easy to have or a slightly more expensive option is to get the sump plugs where the sender screws into the bottom of the sump plug. I personally prefer the sandwich plate, took me about 5minutes to put in and wire up. Easy peasy

I removed the stock sender and plumbed into there.

well he says he is putting a new Oil Gauge in so if he were to do that then he would have a reading on his new gauge and his stock gauge wouldn't read anything :( Thats why sandwich plates and 2way sump plugs are good so you can keep your original gauge

well he says he is putting a new Oil Gauge in so if he were to do that then he would have a reading on his new gauge and his stock gauge wouldn't read anything :( Thats why sandwich plates and 2way sump plugs are good so you can keep your original gauge

 

The reason I put aftermarket gauges in are because the stock ones aint upto much so didnt see the point of wasting money on a plate just so the stock gauge could carry on working...badly.

http://www.300zx.co.uk/forums/showthread.php?t=63938&highlight=oil

thanks all, soz for the confusion. I meant to say oil pressure gauge. LOL, its for a new aftermarket gauge. wheres the best place to get a greddy plate from??

Edited November 28, 200916 yr by jonce