... where I might get some. They need to be approx 700mm long and if they were stainless it would be a bonus.

 

Have searched the usual places, but only found stuff less than half that size so far.

 

 

Cheers

try plumbing shops, they use big jubilee clips on some multifit fittings, not aure what sizes they are though, whats it for???

Andy, what's the application??

Try a commercial vehicle garage, Scania, Volvo or such like as some of them on certain applications are huge !

 

Alan........

try this place http://www.emwardfastenings.com/product-range.html

It's for a flue that is being fitted to my house for a new woodburning stove. 6" insulated flue has an external diameter of ~700mm. I need one to keep the lead flashing around the flue tight, and potentially two more to affix a support stay.

Might be worth while using a steel cable tie then....but you'll need an applicator tool....which I have.

 

Hmmm, not thought of that, would probably do the trick though ...

When do you need this doing by? I'm in Essex/Kent area toward the 3rd week of December......I have some spare ties and a gun.

Kinda Saturday really ! Right now I have a hole in my roof and no flue in place, because the joining clamps were missing. They should turn up Friday and I have to get the hell on with the rest of it before it rains more. Thanks for the offer though, I'll see if I can find someone locally with something similar.

Edited November 11, 200916 yr by AndyP

you can buy jubilee clip stuff on a roll cut it to what ever length you want and add the tensioner.

here you go !!

 

http://www.fastfixdirect.co.uk/code/navigation.asp?fType=Fasteners&MainCategoryID=56399&ProductCategoryID=51321

 

Well done Gaz! Never seen that stuff before. :bow:

I could see what's in the VMI store at my work ;)

You could always join 2 or 3 of them up to make the size you need

You could always join 2 or 3 of them up to make the size you need

 

 

Yeah - What he said. I was too slow.

You could always join 2 or 3 of them up to make the size you need

 

Yeah, I know, gets a bit Heath Robinson though ....

Problem solved !

 

The numpty company that forgot to send the locking bands for the flue just sent me six instead of three. With a bit of hammer application to flatten out the curved edges I now have three 60mm wide stainless steel bands with worm drive fasteners - perfect !