i have a airlock in my front brake lines due to caliper change.

I've tryed bleed but with no success no brake fluid coming out of the bleed screw "bleed screw is not blocked".

did this happend to anyone here before? its so strange this one.

Is the problem on both sides at the front this might help.

 

http://www.ttzd.com/tech/linestech.html

 

Paul

Edited June 30, 200916 yr by 300_zedx

it is yes... i fitted new brake lines bout 6 months back and had to blead the braking system then and never had a problem am really lost on this one lol

you havent put a kink in one of the break lines by mistake have you??

 

 

no have fluid at the inlet off the calipers on both sides just when bleeding dry as a bone not even air?

if you can identify which line it is from the master cylinder, open the pipe from there and see if fluid comes out.

 

Paul

Have you tried with the bleed valves completely removed.

unless pumping the brake (in the on off motion for bleading) i have no fluid just coming out with gravity like any car i have worked on

are you bleeding the brake the same way as in the link I sent you.

am bleading the brakes oppisite corners back and front altertaly but have not done abs actuiator as did not know bout it on this car would this stop fluid getting to the lines at the front if had air lock? i have nothing at the nipple end at all bone dry all fluid is as feed line only and only when pumping brake

I would follow the directions in this link and see what happens.

 

Paul

dead on chaers for ur help and advice

Paul