Jump to content
View in the app

A better way to browse. Learn more.

300ZX Owners Club

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

the carbon canister is out, didn´t have the small hose on the fender that needed blocking off according to the write up, but it also mentioned that some peopple had written in to say they didn´t have it either, so that´s cool.

rerouted the feul tank breather pipe and then went to the engine bay. took the two right hand side intercooler pipes off, capped the small pipe on the throttle body and also the one that goes to the balance bar, as "instructed"

 

The problem is the write up says after removing the IC pipes

 

"Now look down toward the front of the car, just outside of where the large IC hose ran from the turbo down to the IC. Find the metal vacuum galley as shown"

 

I definitely do not have said "vacuum gallary":confused:

 

then

 

"Next trace back to where the vacuum lines are connected under the hood. The top line went underneath the driver side throttle body (TB), "

 

Not on mine it didn´t, the pipe connected to the throttle body went strait to the front of the car and dissapeared down the front somewhere.:confused:

 

 

can I ignore all that and have I capped off the right stuff.

 

any help greatly appreciated , as always :)

 

Maz

Featured Replies

Don't forget that the instructions you are following are from the US - so drivers side would be the left. If you have the large boost pipes off then you should see a small metal hose under the throttle body on the L/H side of the vehicle. Then where the large pipe goes to the front of the vehicle you should find the 'tree' which is a series of metal pipes close together, you definately not got these?

  • Author

defo don´t have them mate...and mine is a left hand drive US import...90 model ..manufactured 89 ...instructions were for a 92 model ..i´m guessing there´s the difference.

  • Author

hey there Rob

 

I´m in Mönchengladbach (JHQ) mate

 

Maz

  • Author

sounds like a plan. I thought Jonce just had his car done

  • Author

So...has no one done a carbon canister removal/bypass on an 89-91 Z as I´m guessing that´s why the "gallery" of pipes etc mention in the write up are missing.

  • Author

okay, not to worry. Just test drove the car after removing the carbon canister and capping the pipes recommended and she drives sweet. And for the first time in about 3 years when you open the petrol cap air gets sucked in as oppsed to blown out :)

 

sorted, and well happy.

 

:)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Terms of Use

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.