I am wanting to upgrade my engine oil cooler and from reading past posts a 19 row one is the way to go. What ones are you guys running or any recommendations?

Yes 19 row is perfect for the engine.

 

Im running a 19row Mocal Oil cooler.

Same here :)

Yes 19 row is perfect for the engine.

 

Im running a 19row Mocal Oil cooler.

 

Where is best to get it from?

I'm running a 25 row for the engine oil and a 25 row for the autobox.

They are mounted where the intercoolers used to be ;-)

I got mine from Demon Tweeks but they are never the cheapest.

Can't remember which fitting it was either as they do loads.

 

http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=ROAD&pcode=MOCOC172-55

I got my 2 x mocal's from Raceparts

10- to 13-row half-width coolers are more than sufficient. If you look at rally and GT3 race cars they only ever use a maximum of 13-row coolers and their engines are under far more load/stress than our engines.

 

I can get every conceivable size cooler and fittings but will need to check on current pricing as that will no doubt have changed since the last time I looked ... :( Will post up costs later or at the weekend.

got mine from setrab, about the best you can get as they put them on rollers, bentleys etc i bought mine direct from them at half the price you will pay for others!! well worth looking into.

 

trust make a very nice kit but its not cheap

 

Mike

19 row setrab also :D £40

i have standard oil coolers and have an oil temp gauge...

after giving the old girl a bit, the temp is very stable, (between 80-90).

i have a modded engine, tubs, smic... etc.

 

i have to agree with dan (DTA) on this one.

 

but for £40 (setrab), as jim say, i would buy 'em!! (it's cheap!!)

 

al.

Edited April 24, 200916 yr by AlanZ

i have standard oil coolers and have an oil temp gauge...

after giving the old girl a bit, the temp is very stable, (between 80-90).

i have a modded engine, tubs, smic... etc.

 

i have to agree with dan (DTA) on this one.

 

but for £40 (setrab), as jim say, i would buy 'em!! (it's cheap!!)

 

al.

 

are you absolutely sure you have a standard Jap engine oil cooler ?

 

The Standard Jap cooler is proven to be too small, this is why Nissan fitted a 19row oil cooler as standard for all UK and European models.

 

Its quite common for owners to fit the UK oil cooler to imports.

Edited April 24, 200916 yr by Yowser

i have standard oil coolers and have an oil temp gauge...

after giving the old girl a bit, the temp is very stable, (between 80-90).

i have a modded engine, tubs, smic... etc.

 

i have to agree with dan (DTA) on this one.

 

but for £40 (setrab), as jim say, i would buy 'em!! (it's cheap!!)

 

al.

 

£40 second hand ;)