Might be stating the obvious (to some) but something I didn't realise until I started trying to pick tyres for aftermarket wheels is that the profile figure - e.g. 40 - is 40% of the width.
So for a 255/40/17 tyre - diameter is 255mm, profile / side wall is 102mm (40% of 255), and radius is 17inches.
Learning this made it all make a lot more sense to me. I also have this graphic to refer to. Can't recall where I found it but it's now saved on my desktop!
I also wanted a chunky looking tyre with a solid side wall and after going 245(F) / 265 (R) , have since switched back to 235(F) / 255 (R) as I found the handling was noticeable more boggy and I use the car for fast road and track use. For ref, these tyres are on 18" BBS LMs.
By
sumshiftyguy ·
This might sound like a dum question but whats the best way to get coolant on a 300 TT?
someone told me its not straight in the radiator, that there is a cap just for coolant and the rad only takes water, is that true?
need to get that done pronto but im kinda in doubt now..
Any advice very welcome as usual :bow::bow::bow: