For Sale - Parts

Hi Guys, well i have 3 for sale threads up and running, due to an immediate need for some cash, i'm taking a punt and reducing all prices, some up to 50%, Here's the revised list of prices Cruise control Switch was £30 now £20 SOLD Polished Plenum was £175 now £90 SOLD N/A Hard Pipes was £50 now £25 SOLD Polished coil pack brackets was £40 now £20 SOLD 1 Steering boss was £25 now £20 ONLY THIS ITEM LEFT!!!! Crystal Side Lights was £25 now £15 SOLD Speedo console was £40 now £20 SOLD I can only apologise to the members who have bought items at the first price, but something has come up and i have to do this. can anyone tell me if th…

Hi all, I've had a massive clear out of zed parts and spares recently! I found this hiding in my garage with a few other bits. Genuine Stillen billet aluminium rear strut brace. £140 delivered I have advertised this else where so be quick Thanks Dan

Hi all, As above £55 delivered

Selling as im not going to fit it. Super rare part in gun metal powder coat price doesnt include postage.

Set of oem mats in good order £48 posted mainland uk Potentially sold Carbon fibre fan shroud fits over the std plastic one from a TT. SOLD

As above guys & girls desperately needed... Cheerz James

Well a few bits here for you, Pair of crystal front indicators/side lights. Brand new, never used, £25 posted SOLD Steering Wheel Boss kits 1 off, £20 plus post I've got this rear light cover, full car width, sometines it looks ok, needs some grp attention and some tidying up, If its your thing, £20 will secure, plus postage i'm afraid or come and get it which would be best, otherwise find some members who are travelling up and down the country, and organise a trip for it. White N/A Speedo Console, I tried this as an trial to see how it looked and felt, i know there will be mass condemnation about it, put that on another thread, this is for a…

Right I was going to go for the full manual conversion however due to time and the fact I'm not to confident doing it I'm going to just put in another auto for now. So I'm hoping someone on here has A GOOD ONE, A KNOWN GOOD ONE! So what have you got guys! Must be cheap or might aswell pay for manual conv

In Black, a little dirty but will clean up well. £20 posted. Steve - - - Updated - - - Image has really highlighted the browny dirt on the covers...this does come off!!! LOL

I'm looking to buy a manual box and all of the bits needed to do the conversion ie pedal box etc etc. I am on a bit of a budget so cheaper the better

Here are some more parts for you. Set of rear lights and centre panel , which illuminates, i'm sure (2 wires sneaking round the back) Light good condition, doesn't look like ever been fitted as no sign of black sealant. (may split) £80.00 Sold Cruise control steering column switch. if you want to move the steering wheel buttons, say for an aftermarket wheel, This should do the job. £30.00 SOLD Thats it for now, when i get the energy to walk to the shed, i'll look for some other bits. Rich

Hello, Im looking for a rear lights, no cracks etc. Thanks

Looking for a set of Intake and Turbo hardpipes please, If you can help let me know ASAP Ta

I have my current Stoptech BBK for sale. NOTE is still on the car and will be available for collection in around 2 weeks. This is the Stoptech ST-40 355/32 front and ST-20 328/28 rear. The entire kit is in very good condition and while the kit has seen fairly hard use it hasn't had a difficult or prolonged life. The brakes are available for viewing at Eurospec in Guildford. It will come with race pads and / or road pads. Any questions fire away.

I've recently changed my front brakes to this setup, but I'm now going to be changing them again so this kit is up for grabs. The Brembo calipers are from a Nissan Sentra Spec-V and, unlike the 350Z Brembos, these use a 12mm bolt so they bolt directly to the Z32 hub with no modifications whatsoever. :) I very recently had the calipers thoroughly cleaned, blasted and then painted in Candy Red. I replaced the Brembo decals as well. The pistons are in superb condition and I replaced all the seals before fitting them to my Zed last week. I'll fit a brand new set of stainless steel bleed nipples as well. The discs are 320mm in diameter and I think 28mm thick. Th…

Hi looking for rear calipers for my Z maybe have someone for sell let me know can be any condition Cheers

19" Rial wheels with tyres, Front and rear 8.5 ET30 fit to a zx without arch rolling, Front tyres Nexen N6000 ZR 234/35/19 loads of tread left Rear tyres Falken 452 ZR 265/30/19 about 3mm tread until wear bar and showing some signs of light cracking. Some curbing (see photo's) someone handy at diy could easily sort this out. I have started to refurb one of the wheels so it will need painting. Two sets of center caps OZ and Rial I have no wheel nuts for these wheels Viewing is recommended Price £500 pickup in person is preferred

Can only get 3 turns on the nuts with the wheels on my new import, so not really very safe! I'm going to swap the wheels over from my old zed, but I don't want to leave that one with unsafe wheels either! The wheels don't have to be stock (though that would be nice), I don't really care what they are tbh so long as they fit reasonably well. 4 reasonable tyres would be ideal so I don't have to mess about with them. I'm in Wokingham (near Reading) but willing to travel a bit. What have you got?!?

Known working Jecs OEM Maf Price is posted mainland UK

hi all, im after a pair of silver wing mirrors for my 1993 na import.

Hi guys , I'm after some single exit exhausts for my tt . Like the sound and looks of the greddy ones or trust ones . If you have other brands let me know , i'"" check the sound out on you tube and see if I like it. Not looking for subtle ?

FREE - collection from Newcastle area only. Car.Mad spoiler attached, needs blending in.

Hey, Looking for the screws for these - I don't have any screws that come close, annoyingly I don't know where mine have gone and would rather use 'proper' screws. I think they're the same as the front sidelight / indicator screws. Possible like this - https://conceptzperformance.com/nissan-oem-300zx-sidemarker-corner-combination-lamp-screw-90-96-z32-01451-00041_p_5921.php Cheers!

https://www.gumtree.com/p/car-replacement-parts/nissan-300zx-fairlady-twin-turbo-or-na-front-and-rear-leather-seats/1193952503 In good overall condition some wear which you would expect from a used interior, I think the fronts are leather and the backs are vinyl. Drivers seat is electric and in full working order, passenger seat is manual Swapped them out as iv gone for recaro speeds instrad I'm based in Swansea but regularly travel up to Newport area if that helps with collection or could drop them to powerzed in Bristol for collection of that helps. If you need any more pics or more info get in touch

Hi guys After picking up the exhaust i bought from Dan im now on the hunt for the 3" components i need for the front end of thr system. So has anyone got a set if divorced downpipes and test pipes they want to part with?.