For Sale - Parts

Hi. Will buy used but mint condition pair of bolt on turbos (500hp +) for my Z (TT). Please PM if you have spare ones:wink: Thanks!

Hi guys I found another couple of silly bits I have misplaced, Has anyone got a set of front washer squirters with the 1way valves etc in the pipes... And the 2 half moon shaped caps that go over the anti roll bar bushes and bolt it to the rear subframe, Any help appreciated,

Hi guys I really need both of the rear camber bolts 2xbolts with the funny washers i need the other 2washers what go the other end of the bolts and the nuts...Please please please lol...I want a drive in my zed 1st time in about 2yrs.

Does anyone happen to have one of these available? It the little white plastic mount that is bonded onto the inside of the door card, which has a pop fastener slotted into it to hold the lower section of door card on. The one I need sits in the lower aft corner and should be the tallest mount of all. CheerZ Joel.

My friendly MOT tester is unable to test my car in the time scale I need. As HIDs are a grey area, and I really don't have the time to fight with an MOT tester over them, does anyone have a pair of standard H3C headlight bulbs they could loan me? I can send them back to you once it's through the test. Need these urgently as MOT is booked for Friday. Cheers

As per title, I am after a genuine original passenger side horn for a 300 tt uk lwb. I need the passenger side as I have the drivers side refurbished and my one is rotten. It has to be the passenger side as I believe that they are a different pitch when sounded separately.

Free to anyone that can make use of them

Im after a cheap project Zed as close to Ayrshire as possible. Prefer a twin turbo. Rotten doesn't bother me just want one that runs ok. Let me know what you have and how much you want :)

as title im after the passenger side rear quarter window from a LWB close to ipswich so i can collect , cheers

I bought them early last year from the US but due to various complications of having a limited run made they didn't arrive till last month... They are a bellmouth design to avoid any boost creep with big turbo's and breather mods, all tig-welded, and have v-bands :D Only considering selling as I won't be putting them to use till next year now given how plans have changed, and if I lower the engine, they'll need to be modified which would be a shame. £900 delivered

need front wings both left and right sider must be rust free any colour will do

Looking for wheel spacers the same as these if poss 280972278029 pm with the price ted

Front indicators, clear conversion (de-tangoed) and mod for larger SMIC fitments, £30 posted. (these don’t have the hole for the sidelight) The units have been pulled apart and the amber lenses removed. The bulb holder has been cut off, a new hole has been made on the other side of the unit, the section cut out has been heat welded over the old bulb location and the bulb holder has been heat welded in the new location. The inside has been re-sprayed silver. Units have been cleaned and re-sealed.

I left my original Nistune ECU in a customer's car the other month which promptly went in for a load of work somewhere, but I've finally got it back, so my temporary one is up for sale. The realtime board is about 1 month old. £275 delivered :thumbup1:

Hi all, I have my refurbished Brembo calipers using Ds2500 pads all brand new. The calipers are now silver with red decals. The calipers was off a 9000 mile Z. I painted the calipers and then used hi temp decals and lacquer that was then baked on. With the calipers I will also supply the larger 350z caliper bolts and braided lines. £530 ono

BLITZ FATT DC - Turbo Timer removed from my last breaker. Sell for £50 posted ono.

Selling a toyo aftermarket radiator, Bought for £160 just over a year ago; selling for £60 posted Has a slight twist in the overall shape but does not leak and when fitted fits perfect.

Hi all, Im looking for a VIS carbon fibre bonnet, preferably no marks or scratches but if it can be buffed out its not a problem. Also looking for a rear perspex strip for the boot. Thanks Sav

Was going to put on my zed but not so sure anymore. Would rather just get her on the road for starters. Exact same ones on this link £250

http://www.z1motorsports.com/product_info.php?products_id=931i all, http://www.z1motorsports.com/product_info.php?products_id=933 I've decided to sell my JWT 400+ cams, and JWT uprated valve springs they are like new as the car was only running for about 5hrs on tick over when trying to sort a base map. The cams have been checked by the garage when the engine was stripped. The cams was run in for 20 mins as per instructions. £490

As per title, wanted a 370cc injector for a friend of mine for his series 1 Twin Turbo

I have these oem gaiters in really good condition with no marks. £40 delivered

http://m.ebay.co.uk/itm/111371547597?nav=SEARCH I have as above the Apexi boost controller including the original box. was only wired up about 6 weeks ago. The car never touched the road so it wasn't even programmed. I had it bonded in to my custom dash so may have some glue/silcone marks on the back that I'm sure will come off. £360 delivered.

Hi, I'm selling my Scarab bumper that I bought from car.mad. I've trial fitted it and trimmed the inside to make room for my front mount. £160

Hi all, I have a set of car.mad side skirts for sale never fitted. £100 delivered