syed rahman

Can anyone recommend a firm in the London/Greater London area who can chrome alloys ? Also what is the ball part figure for chroming per wheel ? Cheers.

Greetings, Can someone please comment on the plus and minuses of using the above. Basically wanted to know the difference between them and which system is the more popular etc. Please excuse my ignorance but I have never used/seen anyone of the above thus know virtually minimul. I am thinking of purchasing one and didn't know which one to get. Any recommendation please ? Cheers...

I am having problems in stopping my Zed ever since its come back with the mods giving more power. The stock calipers and Brembo discs doesn't seem to be effective enough. Today I panicked as to whether I would stop in time after a launch from the lights and then sudden traffic ahead. Can you guys and gal please steer me in the right direction as to what my options are (cost effective wise) in terms of brake upgrades etc. Need to to know how much one needs to spend parts+labour for the upgrade. Finally any leads on where to source the parts ? Cheers !

Excuse my ignorance but whats/wheres VIS ?

Tried Luke, he doesn't do them...

syed.786@btinternet.com Which kit do I need to buy ? Cheers

Where does one purchase a carbon fibre bonnet for the Z ? Cheers !

Has anyone installed this on their car ? How beneficial was it after install and overall was it worth the money spent ? On the Powergate Solutions website, there is a massive list of products, which one does one go for ? Finally, how does one get this installed and what does it cost, anyone in North London who specilaize this ? Cheers..

Can someone please comment on what the process is of swapping the standard auto gearbox handle to a Razo one. :confused: :confused: :confused: Looked everywhere to get the existing handle off but no joy. I have undone the small screw behind the handle but the damn thing won't budge. :headvswal :headvswal :headvswal Also do I need specialist tools/experience to install the aftermarket Razo or is it simple plug and play. :( :( :( Extremely grateful.

Mate, in my opinion hypothetically speaking, if someone threatened to do my car, I wouldn't wait, I would go and break their face and made sure they regretted saying it. Whack'em out cold I would bro... Offence is the best defence IMHO. Remember, the above advice is hypothetical and I can't be held responsible if someone decided to follow it in the real world.

Thanks Guys ! What would I do without you all !

No worries bud.

There is a specific formula to calculate resistant / currents /voltages when you are trying to piss around in my case here. What this formula is I don't have a fuking clue. Secondly, the wires going back to the control unit doesnot show up on the wiring diagram. If I knew the answer bud I wouldn't be posting. However it seems to me I am being mocked for some reason ? Why is this the case with all due respect ?

Que ?

Mate, installing a kit according to instructions given and tweaking it to your needs is one thing. Pissing about with electrics with no wiring diagrams and doing things by trial and error with a possble risk of damage is something else (common sense I thought). Didn't realise you had a bubble to burst. Sorry to short fall your expectations.

Ok I definitely need help on this. My Cobra alarm has a red led on the dash and I was hoping to change it to a blue led to match my interior lighting. Now looking through the spec the red led is running on 12v and the blue led I have found runs on 3.6v thus I need to put a resistor to get this to work. Now the thing is any ideas what strength resistor do I put and where do I get one ? Also, will this resistor be attached to the red wire of the blue led going back to the control unit or the black one or do I need 2 resistors on both the wires ? Never was an electronics guru so need help guys and gals. Cheers !

Thanks Andy... Still waiting for the ECU, once I have it, I will send it to you for the chip. Cheers

Do I have to take the pipe off ? My pipes are seriously stiff mate as I tried to replace before with hard pipes.

Thanks guys, extremely grateful..

Is there a picture I can have a look at please ?

Is there any links/writeup to changing a S1 PTU to a S2 PTU ? I am ashamed to say, I couldn't even find the S1 PTU today after faffing around for 30 mins under the hood. Is the conversion a doddle or a pain ? However having problems finding it in the first place. Has anyone got a photo of it whilst on the engine ? Also any ideas where this temp sensor goes ? (Just got one off MJP except always thought it was a yellow one but was given a blue version for some reason).

Thanks guys, really appreciate it...!

Is there a write up or pics of how to swap out an ECU please ? Thanks !

You will have to declare it or your policy is void.

Ok folks, where do I get one of these and how easy is it to bung on ? Cheers !