snoopy

The locating tab on the connector is in the middle of that connector, on the Z32 they are offset

I know someone who already had this idea on his TT and is seriously looking inot it, as he has removed all the air con gear etc, so plenty of room...

Just what we needed to hear tha was Lol. was eating my lunch as i clicked on it.....

oh ok good not tried any yet thank god

Thanks Guys will try....

Hi all iv'e just got a new mobile but i need to unlock it, it is a nokia 3120 Classic , IMEI: 353102029910103 If anybody can help id be eternally greatfull. Regards Jay

I got to mine ok how SMW1 said, and i know my m8 changed his the same way too, just soak them for a day first......

gonna fire bomb it. Aaarrrrhhh

i checked it about 7 days ago it was 67.7pence to the dollar today it is 1.00 USD = 0.678674 GBP United States Dollars United Kingdom Pounds 1 USD = 0.678674 GBP 1 GBP = 1.47346 USD

nice thats lovely

Im the nissan workshop manual it says the low level fuel light comes on when 15 litres is left in the tank, I read it last week....

15 Litres

THere is a tab on the side of each relay, Use a small screwdriver, to press the tab and pull the relay..

Hi Bud, Not sure about the rear screen but the heating sounds like the matrix.... If you need one i have a good spare going......cheers Jay

maybe you've got a worn bonnet catch.

Yes posting ti to belfast would cost around £25 give or take IIRC....

Plymouth m8 but i think the booster has been spoken for by FunkiSi now.....but ill keep in touch....

Hi gary. Sorry to hear about your issues but if you need a good brake booster i have one goin spare if you interested. Cheers jay.

Watch you don't get collard for your no plate while your there lisa...

exactly which bit is this you need bud (dials surround the bit where the 2 control pods go into) which side for this one? Targa roof unlock/locked slide

Hi Jimmer, I understand that but if you have consult or datascan plugged in with ignition on and cas bolts loose and you turn the cas clockwise or anticlocwise, should the timing reading on consult or datascan change according to the position of the cas?

Iv.e got no vac leaks as far as i know. (but havent done leak test as dont have compressor) I Have 2 set of plugs (ngk11b's) and (Ik20's). keep cleaning each set and drying in the oven as they are getting soaked in fuel with all the starting attempts. Standard ecu not boosted. All oils and filters recently done. replacement rad fitted 6 weeks ago. (But not much anti freeze in there). New water pump fitted 6 weeks ago. new o2 sensor fitted 2 weeks ago. Spliced 4 new coil pack connectors in today. 6 new injector connectors fitted not long ago. 4 Replacement coil packs fitted for test purposes.... I checked the main earth cable from the battery 2 days ago and the thread had stripped on the connection at the back of the block so i relocated it to a bolt hole about 2 inches away. and at the same time i cleaned and tested the earth connection right round the engine, all is ok. today i checked and cleaned every single electrical connector i could get my hands on, so all is good there. I also checked all vacume hoses etc that i could get too, they are all good, (I checked the intercooler clamps around 3 months ago so they should still be ok). I have also bell tested the wiring loom from ptu connectors to coil connectors, to earth, to ingition relay all is ok. All injectors click when cas is turned. Cheers Jay

Hey Jeff your a life saver bud, Iv'e pm'd you my address. Many Thanks Jay..

Im looking for a generous soul to loan me on a sale or return basis or loan for test purposes and ill post it back a Known proven working PTU, CAS, FPCU and FUEL PUMP. Thanks Jay

Hi Marty i have all this, If you email me we can sort sonething out...... cheers Jay