rolandas

im home every evening after 7. do you know how to split that gear knob ? :)

i have one spare if you want to pick it up from croydon :)

i have one spare if you want to pick it up from croydon :)

can anybody bring timing light and consult to jae ? just want to check if my timing and tps is ok. thanks

can anybody bring timing light and consult to jae ? just want to check if my timing and tps is ok. thanks

fitted chrome bonnet catch and chrome coil packs brackets

if you are using vinyl you need to remove the backing of the vinyl ... it`s like thin cloth ... that will help you to strech it and would not peel of in the heat. the best way to do it is by using a paint brush with a bit of acetone and just peel it off

is it real leather or vynil ?

all 4 rocker cover pipes came off on mine ... i just used gasket sealant and stuck them back

oem bush stays in place and them collars go inside the bush. it does improve the ride

Them ones. You just undo the bolts that holds oem bushes. One at a time. Slip the one with a groove on tol and full circle at the bottom. Fit bolts back and job done. Simples

That's what i use :) the only thing i have at home :) but my car was sprayed in the hardest ceramic clear coat available. So i was told there should be no scratches for long time :)

No :)

And as for the shocks high it made no diference on mine when i fitted coilovers and done experiment with one side lower. Car still drove straight

Just fit collars 5 min job and don't need to remove subframe

I think oem struts are sided cos of the bracked for brake lines. On coilovers you can move them. Oem are welded

After respray i have no single swirl mark on my car :) whats the besy way to clean it wirhout scraching it ? :)

Why would you need that ?

Don't know. Just pre cat test

No they are connected

I might forgot to plug it in after respray :) going to have a look :)

they done a pre cat test and it still failed. it was 6%. Could it be because i removed carbon canister ? or timing is incorrect ? i replaced cas and had no timing light but i marked it put it in the same way. How to reduce emmissions :) thanks

That's why i paint in my bedroom :)

I did asked if anybody want any parts before removal. Now they gone to scrap

Here's a pic of amb temp sensor. But my guess is one of the temp sensors in air ducts is gone. I had the same problem