mattin29

I've had my zed for two years now and covered 7000 miles in that time. The thing is since I've owned it there's been a strange bottom end knock. When I first purchased the car I took it straight to zed world for a service. Jamie told me the bottom end was knocking but that was two years ago and 7000 miles later. The knock is no worse and the knock goes away as soon as I start putting my foot down. The knock is more noticeable at low speed then goes away at faster speed. I was told by Jamie at zed world that my car would only probely last a 1000 miles max. But it's still going strong could it be anything else this strange knock??? I would be grateful for anybodys help. Cheers aron

hi ive got a single exit hks super drager system, with decats, its a 3inch system with 6 inch tailpipe. its got the silencers on which doesnt make it loud. its a qaulity sound that it produces. and its not as loud as my twin exit mongoose system i had, aron

hi, thats just the ball joint that goes on the hub side. i did replace these too as they always wear! you want the actual hicas arms you can get them of ebay i paid £20 each side. just type in 300zx rear inner tie rod that should help aron

cheers guys thanks for all the advise, ady i will be in touch and maybe get something sorted after xmas. cheers aron

ive got the fibre glass ones, but want to do something different with them. do you no any good companies that would be able to wrap them in carbon fibre for me? cheers aron

hi guys. does anybody no where i can get viper vented wings wrapped in carbon fibre, or made in carbon fibre. looking to do something different with the wings think they would look great in carbon fibre! cheers aron

hi guys. does anybody no weather zedworld do the 4wheel laser alignment? cheers aron

im running 15psi on stock internals and tubs. only upgrade zedworld ecu upgrade. oh and brand newly installed hks super drager exhaust and decats. thing is i think a disaster is on its way, bottom end has been knocking for a year only a little which a cant work out. and over the weekend gearbox has started whinning. oh no aron

do not get either kit. iv got the 2nd pic kit. rubbish fit they need cutting down on the tb pipes, then you havent got the rolled ends which makes it harder to get a tight seal, ie little boost leaks. go for a good set like z1 motorsport kit

Hi all. Has anyone had the Godspeed rear control arms from the USA? The problem I'm having is getting them to fit in the subframe! There just not wide enough. Could there be anyway round this? Cheers

cheers for that dave big help.

hi all, my brother is doing all the work on my z hes now come round to installing my subframe bushes. hes removed the old ones keeping the metal lip at the bottom of the bush. he now saying he cant fit new ones as there the same size as the gap in the subframe (to tight) also he says theres two little studs that stick out half way down which would tear against the bush if you could force it down?? also what happens with the piece that unattaches from the bush ie it comes in half more or less. any help would be great as i cant wait to hurry up and get my car back on the road:thumbup1:

mine was exactly the same as above. n/s/r o/s/r outer hub bushes also both hicas arms. so i just bought the eliminator lit from z centre.

ive not long had hsd smoothie coilovers and there mint. they have a 16 stage damping settings. ive had mine slammed with stage 10 damping it feels great.

hi. ive just purshased a hks super drager cat back system. can anone advise me on a good set of decat pipes, cheers guys