Everything posted by PULSAR
-
SWB N/A on Pistonheads
So is that mega over-priced even tho' its a shorty manual? What should be top whack do you reckon? Was sent lots of pics & it does look v good inside & out.
-
SWB N/A on Pistonheads
Hello Peeps Seen this SWB N/A manual on Piston heads does anyone know it? The owner has said that it was owned by a former club member. SWB on Pistonheads It looks very nice was going to go up over the weekend from Bognor (305 miles) then he tells me the heater matrix has been disconnected. He said it was done by the previous owner but doesnt know why. I have been assured that the air con still works, is this possible with the heater matrix disconnected? Also would anyone know what kind of cost may be involved in getting that sorted either a new matrix or just connecting pipes. Any help and asap (with the short time span) would be most appreciated. Chris
-
Budget for 400 rwhp???
Nice one, thats what I was thinking, need reliability cos its my every day driver. Will have to get onto Smithy & see if he'll do a deal on a big shopping list ;) ;) Thanks chaps for all your input so far, I don't post very often but when I do everyone is spot on with advice, cheers :bow: :bow:
-
Budget for 400 rwhp???
Nice one, so rest of internals are beefy enough for the power? Sorry to go :x: on but with the list of Smithy's parts I originally listed at top of thread wot sort of hp could I be seeing then?
-
Budget for 400 rwhp???
Forgot to say already have eibach springs and 255lph fuel pump. So £7000 is about right then. Takemetothepub what mods would you recommend for 3.5k? Just trying to get an idea cos if I can safely get awy with spending that much I will ;)
-
Budget for 400 rwhp???
Superb, wot mods are we talking though for that money and bhp + half decent reliability??
-
Budget for 400 rwhp???
Hey peeps, just wondering if this is going to be a viable project. Am I looking at mega money for that kind of hp at the wheels?? The mods I have so far are: Sus induction Decat with divorced downpipes, longlife s/steel system. Lightened crank pulley Avc-R boost controller Before I fitted the boosty it was 280 at the wheels and I'm now running 0.85 bar which feels quite nippy. Looking at Smithy's website I've got a list of things I'm guessing I would need to acheive the above figure safely 555cc injectors, intercoolers,engine rebulid kit for reliabilty, head bolt kit, big brake kit, 6 puck clutch, lightened flywheel, turbos of some kind. I can spend up to £7000 including labour costs. Any feedback would be greatly appreciated because there are a lot of 200sx's round my way I need to put in there place :mac1:
-
my zeds dead in crash! pics to follow
I hope you got out and cracked her one :mac1: no excuse for being that unaware :nono:
-
She won't go into 5th!!!!!!!!!!!!!!!!!!!!!!
Hello, I need your help guys :D I'm having major probs getting my Twin turbo into 5th gear at high RPM. Every other gear is fine but gunning it going from 4th to 5th is a no go, it goes halfway in then just pops out never fully engaging. The only time it will go in is at v.low rpm e.g less than 200rpm which is not practical.I have done a few mods but nothing that would stress the 'box although I do have a flea bay short shifter fitted. Could it possibly be the synchros going?? Thanks in advance Chris
-
Bonsaicars, are they good?
Hi, Word of warning they are an absolute nightmare :smash: :smash: I bought my TT manual from them in 2004. First saw the car in july put deposit down, said car would be ready in 2 weeks!! Month & a half later still not ready, finally picked it up, had it 3 weeks started running like a bag of shite. Tha car was picked up by them & spent another month with them scratching their heads no clue, they finally agreed to take it to main dealer who diagnosed a that the cambelt Bonsai had fitted had slipped :shock: luckily no engine damage was done but I had to fight tooth & claw to get them to foot the bill fvcking cowboys :xxx:
-
Gone Gone Gone
Hi, You didn't happen to buy it off a guy called Mike did you cos looking at that pic I made the No. plate for that pile of sh#t. He bought it as standard C2 GT & he's spent roughly £15k++ on it :eek: :wack: He's a proper c*ck ring because with all that money I tried to convince him to buy a Skyline GTR or similar but then again he is a ginger :xxx: :xxx:
-
While im fitting this at the weekend...
- APEXi AVC-R
Thanks Danny, any idea if you have to buy the harness separately or should I have specified when I ordered it, too late now me thinks :smash:- APEXi AVC-R
Hello peeps, just a quick question to anyone who gives a sh@t, is the APOXi AVC-R vehicle specific or does one fit all. Just wondered as have ordered one off flea bay & now only wondering if it would have all the bits for a twin turbo set up :wack: :wack: Thanks in advance, Chris :dance:- One thing been bugging me from the off.....
Knoght Rider! Funniest thing I've seen all day. :rofl: :rofl: :rofl:- Best thing u have EVER brought!!
Well said that man, like people saying "off of" instead of just off! Best thing bought would be the Zed then my Pulsar GTi-r then copious quantities of porn :x:- how much more wider can i go?
I'v have 245/40/18 front 275/35/18 rear, no rubbing but fun in the wet :eek: :eek:- Exhaust system
Not heard of stealth mate, am in bognor regis & i went to Longlife in Carshalton in Surrey. Very helpful, I went for one can either side in a Blitz Impreza stylee just over 4" can. look v. :bow: cool & sounds like a tuned skyline very loud when you put your foot down although you can specify exhaust tone if yopu want to be a bit more subtle!! Heres their no. if you need it 0208669671 Just for the record cost was £500 from de-cat pipes back inc vat HTH, Chris- What part of the UK are you from?
WEST SUSSEX, SH#TTY BOGNOR REGIS!!- Draw a pig...
Had exactly the same results :shock: :wack:- Badboy Styling
Get legal on his Bad Boy Ass! Sounds like a right shitehawk :xxx:- Fitment of De-Cats...
Hello Steve, Mate the only probs as far as I know were a couple of bolts from the turbo to the down pipe things, awkward to get to but if you have a ramp to work on or a pit it won't be a problem for any half competant mechanic :D If you want to remove the bolts working from the top of the engine I think someone has said that you have to remove the master cylinder, so just get it on a ramp. Oh yeah just remembered the guy that did mine said the ebay pipes were ever so slightly off & had to re-drill a couple of the pipe holes to get the bolts in but again nothing too major HTH Good luck! Cheers, Chris :smw:- Big wheels!
What is one of those called & how the fvck do you steer & stop!- Save Castle Coombe
Done No. 1344 :D- NZR but how good are your eyes
F*cks sake, Staring right up close when that happened :wack: - APEXi AVC-R