Medallion Man

how about finding some at a breakers... aside from that the type of rubber and its use makes it difficult to glue.. particularity since you haven't been very specific about the issue with yours.. :)

agreed... when was the last service and have you done any PM on it... a good clean of all connectors and checking all vac lines is a good start.. good luck.

I'd guess that each would have to be assess individually as the damage can be varied and also because of different response ... so if it is a mess and cracked then it's junk.. but if it was only a slight blow due to failed gasket and the block is clearly in good condition.. it might be work something to someone.. best to ask Jimmer (or Jeff)

I'm no expert but it could be valve seals or rings... I'd say you need to get an expert to have a look at it first before spending a load of money. best of luck.

and what colour smoke? is it only on idle? is there a smell? what maintenance have you done to the car? is it standard? are you loosing oil or water?

be aware that Jap spec bumpers have different indicator, side lights and these inter-coolers will foul them... an adjustment/modification is required.

yeah, it's almost always the rubber pipe that leaks and some of them are hard to get to, always best to check when the car is cold and under pressure (with the pump primed) Oh, and the nose is as good as the eye... :) good luck.

let the Tech FAQ section be your friend... http://www.300zx.co.uk/forums/showthread.php?140784-Fuel-pipe-tips

LOL.. and money you will spend... :)

it may just be that there is some moisture in there, you could try using a hair dryer to blow hot air in and clear/blow the moisture out (not too hot)... at least that way you would know if its leaking (i.e. if it comes back).

Been though my store room and found a few things I don’t need any more.. Prices just to get rid off really.. what doesn't sell will be going to ebay or the tip. Cheers…. still got these.. offers? Door sill trims (blue) Both L & R door sill trims in good condition, a couple of small dents. £9 delivered Front tension rods. In good condition. Again… I bought these as spares but don’t need them anymore. And yes I am having a tidy up.. lol.. £7 posted (or free to a good home if you want to come pick them up from Torquay) [/url] Polished Bonnet stay. Good condition, both clip and grommet included. £11 delivered Green 6mm Silicone vac hose (2 metres long) (From boostlunkies, cost £11.50) £6 delivered

these are a couple of guides and different levels of modification.. http://www.300zx.co.uk/forums/showthread.php?132852-HiD-install&highlight=HID and http://www.300zx.co.uk/forums/showthread.php?117007-HID-light-mod&highlight=HID and these have been recommended by our lights mod guru .. http://www.ebay.co.uk/itm/SUNWOIF-55W-Car-Single-Hi-Lo-HID-Xenon-Conversion-KIT-H1-H3-H7-H8-H9-H11-H4-UK-/251684667627?pt=LH_DefaultDomain_3&var=&hash=item3a999340eb

LOL.. no idea, its not OEM... he must have fitted that himself.. there are a lot of fused for the lights, not only in the foot well but also in the engine bay.. the original 300zx lights are crap, you are better off putting in some HIDs since it already had a projector lens.. have a look in the tech section ... really worth doing..

I'd say yes it you can confirm its the same... some have slight variations ... best to be sure (not a problem, just a waste of time).. :)

is this what you want??? Service manuals: http://www.300zx.co.uk/cgi-bin/manual.cgi http://z32.wikispaces.com/Factory+Service+Manual parts list: http://nissan4u.com/parts/300zx/ USA courtesy parts: http://www.courtesyparts.com/auto-parts/1996/nissan/300zx/turbo-trim/3-0l-v6-gas-engine owner’s manual: http://www.nissan-techinfo.com/deptog.aspx?dept_id=39